Configuring CDR port - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

SYCTEC · 01-14-2004, 10:49 AM

Hi All, I am trying to configure a CDR port by using one of my avail TTY ports located on a 4 port paddle board. My switch is a Nortel Opt 61c running release 25.40. I've changed the adan data to user CTY and in the routes that I want to track, I've changed the rdb CDR to yes. Can anyone shed some more light as to what else I may be missing. I connected an VT520 terminal to the tty port to check for communications and I am receiving some data but not what I was expecting. Any help is appreciated. Thanks! Tom

jack · 01-14-2004, 03:14 PM

Post on the Nortel Portal and you'll get more help.

SYCTEC · 01-15-2004, 06:54 AM

Thanks Jack. I have taken your advice and posted this on the Nortel forum.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modifying SIO_PORT information help	gstrom	Siemens / Rolm	2	01-27-2006 05:16 PM
QSIG MWI Integration between Avaya and Nortel Succession 100	avayapbx	Meridian Systems	7	10-18-2004 09:52 PM
Configuring CDR port	SYCTEC	Meridian Systems	5	01-19-2004 08:24 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)