azaveri

Hello All,
I am a new user here. I have a good web/voice application development knowledge but a very little telephony knowledge. I am building a voice application using voiceXML. I need some guidance as to what would be an ideal PBX system for the following requirnment.

The PBX system should suport 60 PSTN input channels and a RJ-48 or a BNC output. The output is for the Intel PCI Dialogic Card: D/600JCT-2E1 — up to 60 (http://www.intel.com/network/csp/products/7131web.htm) which come in 2 types 75 ohms and 120 ohms, so I believe is shall support a PBX system that have either a BNC or a RJ-48 output. I have to make a purchasing decision to buy the D600JCT2E1 and an PBX system. The deployment of this system shall be done in INDIA. As it is voice application connected to the internet it will not have real person answering the calls the voice apps speech recognization and TTS shall take over.

Please recommend an PBX system for the same.

Please guide.

-Apurva Zaveri