KristiK

Really cool. Chas. Congrats on the accomplishment.

Kristi

imported_colin

i just finished my first book too...



it only took me 10 years to read it !!!!!


well done..chas

gannanpbx

Chas2002, welldone l will love to read it when publish.
You are Great guy.
Gannanpbx.

papa-bear

Writing and publishing a book, what a demanding task.

Congratulations on completing it. Do you plan to sell an e-book version?

John_In_Dakota

Well done, Bravo to you.

Your next book should be called "Chaos in the PBX World"
It could be a story about a mad poster on a certain web page about Nortel stuff. This "mad poster" could be giving out bogus info so he could check the site every 10 minutes to see if someone took his bogus advise and replied back with some not so funny comment.

Some of the characters could be:
Bixxride– he’s the guy who put up the web site.
DS_Milson – He’s from another country and has a lot to say.
Flagburn – He lives out west and the ladies adore him, or so he thinks.
Buccaneer_Ghost – He works in the Windy City and drives a German car.
Zone_Princess – She is an animal lover and has a horse.
Cas_2002 – He lives in the south and is thinking of writing a novel.

imported_colin

Changing an Extension Dialing Filter.
Each system line & extension is provided with a dialing filter, The applied filter dictates what digits can be dialed on that line or extension,

If you already have dialing restrictions on some lines or extensions and want to apply the same restrictions to others just change the filter number to the same as the line or extension that is already barred.
To change the filter:-


1.Place the programming overlay on the telephone (Must be a M7310/M7234 or M7324N/M7324n).
2.Press Feature **ADMIN. The display reads Password:.
3.Enter the Administration password (default = 23646). The display reads 1. Sys speed dial.
4.Press Next until the display reads 5.Capabilities
5.Press Show. The display reads Dialing Filters.
6.Press Next twice. The display reads Extn abilities.
7.Press Show. the display reads Show extn#:
8.Enter the extension number, The display reads.Extn filters.
9.Press Show & the current filter will be shown (e.g.02)
10.Press Change & enter the new dialing filter.

Press Rls or Heading to change another extension n

imported_colin

This feature prevents users from dialling certain numbers by assigning filters (packages of pre-set restrictions) to a line or extension. Filters can be added to an extension even if that extension shares a line. You can also programme extensions to override the filters.

Some of the more popular filters that restrict long-distance calls are already in place by default. Please refer to your System Administration Guide for a complete list of default filters.

In the following example, we assign restriction filter 11 to extension 221.
Then we add a restriction and an exception to restriction filter 11.


Selecting a Filter or Adding Restrictions


and Exceptions to an Extension


Action: Visual Display:

1. Place the programming overlay on the extension
2. Press . Feature:
3. Using the keypad, enter the System Access
code: PASSWORD:
RETRY
4. Enter your password: .Press Retry
if you enter the password incorrectly. Terminal&Extns
5. Press . Show extn#:
6. Enter 221 (as an example). 221:221
FIND
7. Press . Line access
COPY
8. Press four times. Restricitions
COPY
You can now add a filter.
9. Press . Restrn filters
10. Press . Show filter:_ _
COPY LIST
11. Press . Restrn flt 11
COPY FIND
You have selected a filter. You can now add restrictions.
12. Press . No restrictions
ADD
13. Press ADD. Restrn 01:__
ANY
14. Press ANY. Restrn 01:__
ANY BKSP OK
15. Press . Restrn 01: 8
ANY BKSP OK
16. Press OK. Now, extension 221 cannot dial out a number with
8 as the second digit. Restrn 01: 8
ADD REMOVE
You can now add an exception.
17. Press . Deny: 8
18. Press . No overrides
ADD
19. Press ADD. Rember you are still programming dialling
filter 11, restriction 01 for extension 221. Override 001:_
ANY
20. Press . rride 001:0800
ANY BKSP OK
21. Press OK. Numbers that begin with 0800 can now be dialled. Override 001:0800
ADD REMOVE
22. Press . End of session
23. After a few seconds, the date and time reappear on the display. 1 Jan 12:00 pm


Assigning a Dialling Filter to a Line



Action: Visual Display:

1. Place the programming overlay on the extension
2. Press . Feature:
3. Using the keypad, enter the System Access
code: PASSWORD:
RETRY
4. Enter your password: .Press Retry
if you enter the password incorrectly. Terminal&Extns
5. Press . Lines
6. Press . Show Line:_ _ _
7. For this example we choose line 1. Press Line001:Line001
FIND
8. Press . Name:Line001
CHANGE
9. Press . Restrictions
COPY
10. Press . Restrn filters
11. Press . Line retrns
12. Press . Normal:03
CLR CHANGE
13. Press CHANGE. Use flt:_ _
CANCL
14. Press . Restriction 00 has no restrictions. Now, any number
can be called, but from this line only. Normal:00
CHANGE
15. Press . End of session
16. After a few seconds, the date and time reappear on the display. 1 Jan 12:00 pm


Assigning a Restriction Filter to an Extension



Action: Visual Display:

1. Place the programming overlay on the extension
2. Press . Feature:
3. Using the keypad, enter the System Access
code: PASSWORD:
RETRY
4. Enter your password: .Press Retry
if you enter the password incorrectly. Terminal&Extns
5. Press . Show extn#:__
6. Press . 227:227
COPY FIND
7. Press . Line access
COPY
8. Press four times. Restrictions
COPY
9. Press . Restrn filters
10. Press . Extn restrns
11. Press . Filters
12. Press . Normal:02
CLR CHANGE
13. Press CHANGE. Use flt:__
14. Press (Dialling filter 01 restricts calls to local numbers only.
You cannot dial long-distance numbers, even using line 001.) Normal:01
CLR CHANGE
15. Press . End of session
16. After a few seconds, the date and time reappear on the display.

slagburn

You left out Juan_In Kadota...

John_In_Dakota

Thanks for the props. But others come first. It's not all about me.

How's Richardson?