 | |
| |||||||||||||||
| |||||||||||||||
| Siemens Post Questions and Find Answers: Rolm, HiCom, HiPath, 7000, 8000, 9000 |
| Tags: 9005, cisco, integrate, rolm |
 |
| | LinkBack | Thread Tools | Display Modes |
| | |
| |||||||||||||||
| |||||||||||||||
| Siemens Post Questions and Find Answers: Rolm, HiCom, HiPath, 7000, 8000, 9000 |
| Tags: 9005, cisco, integrate, rolm |
|
| | LinkBack | Thread Tools | Display Modes |
 March 3rd, 2006 | #1 (permalink) | ||||||||
| Junior Member
Rep Power: 0  Country:  | Integrate ROLM 9005 with Cisco I am working on a solution to integrate a ROLM 9751 CBX mod 50 9005 with a Cisco IPT solution. The issue I am having is ANI Name delivery between the systems. Does anybody know of a way or what is needed to get this to work and/or have done this? From what I have found the only solution I have found that looks like it will work is to use an intermediary device a Hicom to connect to the ROLM using CORNET and to the Cisco gateway using any standard ISDN protocol. Calls between systems including ANI DN work fine at this point. | ||||||||
 |  |
| 4 Weeks Ago | #2 (permalink) | ||||||||
| Junior Member
Rep Power: 0  Country: | calling ID number from Rolm to Cisco GW I have a similar situation and it sounds like you have solved the part I am trying to get to work. I have a Rolm 9751 / 9005. It is connected to my Cisco GW by a T1 CAS trunk. On both the Rolm and Cisco sides, I am using E&M signaling. With this configuration, calls pass fine both ways with no issues, but dont recieve any call number or name info. I was told that E&M FGD (double wink) signaling would provide the calling number on the Cisco phones but I cant get that to work. I would love to just be able to see the number of the Rolm phone that is calling me at my Cisco phone. I would appreciate any help. | ||||||||
| |  |
| 4 Weeks Ago | #3 (permalink) | ||||||||
| Senior Member    PP is AN OLD ROLMEN WORKING ON NORTEL AND AVAYA
Location: MIAMI, FLA Rep Power: 9 | The only way that E/M worked to send the extension number and the COS was with a package called Satellite Operations or SAT OPS, but it was proprietary to only ROLMS. The Trunk Group Type was VLSAT __________________ OLD ROLMEN WORKING ON NORTEL | ||||||||
| | |
| 4 Weeks Ago | #4 (permalink) | ||||||||
| Junior Member
Rep Power: 0 Country: | At this point I am not concerned with caller ID from outside calls to Cisco through the Rolm, but merely internal call info only. Since E&M doesnt apear to be the answer, can you suggest something more feasible? The CAS trunk was configured before I inherited this and perhaps there is a better, more efficent way to achieve this? I'm not tied to a CAS trunk if indeed there is a better, cost effective method. Thanks again and thank you for the quick response! | ||||||||
| | |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
