How I remote connect with siemens hicom 100? - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

gmma · 03-01-2004, 01:44 PM

Hello,

Which software I need for remote maintenance for a Hicom 100?
Thanks.
GMMA

alfredo_per · 03-04-2004, 02:22 PM

You need the Assitant L pc tool from siemens , then you have 2 options

1. Use a modem to connect to a digital or analog line in the hicom 100.

2. Or you only need have remote acces(Lan. Internet) to the pc connected to the hicom, i.e. for billing. Certainly the pc tool must be installed.

***Dtu*** · 03-04-2004, 05:24 PM

Quote:

Originally Posted by alfredo_per

You need the Assitant L pc tool from siemens , then you have 2 options

1. Use a modem to connect to a digital or analog line in the hicom 100.

2. Or you only need have remote acces(Lan. Internet) to the pc connected to the hicom, i.e. for billing. Certainly the pc tool must be installed.

Hi Alfredo
On the Hicom 350E the billing (SMDR) output is on a different port to the PC used to make Config changes is the 100 different?

alfredo_per · 03-05-2004, 11:29 AM

The Hicom 100 has one smdr output from de mainboard, if you already use this output to the serial port for billing in the pc, you might stop the smdr connection to start the pc tool using the same port.

If you have the GEE module with SIB, you have addittional connection from hicom 100 using another port to pc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing the number a set is forwarded to from off site.	pcutler	Meridian Systems	11	01-02-2009 05:57 PM
Siemens HiCom 300 H - Cisco Call Manager Integration	sherlockphones	Cisco	6	08-17-2008 09:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)