Hicom 300 SMDR spec - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

hscheff · 04-10-2008, 10:17 AM

I need to parse the serial SMDR output from a Hicom 300 and store in a database.

Can anybody help me with the specification for the SMDR?
i.e. which fields are there and how long is each field?
Many are obvious, but not all.

Here are 3 example data lines (incomming , internal and outgoing call):

Code:

085715030408000033        4618 50087                                   0            VCE101 00401601IC 10100132089
085647030408000101        3894                3608                     0            VCE101 00000002IN 10100132078
085748030408000004        2622 500920         0836564136               0            VCE101 03101601OG 10100132094

Is there any documentation available online?

All help appreciated.
Thank you.

icetea · 05-20-2008, 02:37 PM

nothing on-line I know of. Contact your local vendor and ask if they can provide the doc's

***Dtu*** · 05-22-2008, 11:01 PM

I am under the impression that smdr output can be radically different from setup to the next.

Here is an example of our output from our HiPath4000 (we upgraded from a Hicom 300 - output was the same).
This is the raw format:

Code:

:STNO:  6549 :UNIT:   0 :CHRG:00000.00 :DUR: 0. 0.40 :RD:213 :TYPE:  INCOMING :SERV:    NORMAL :TG/NO:6099 :ST/M/D/H/M/S: 4. 3. 0.58.17 :NODECODE:   30 :DESTNO:                 6549 :PIN:             :COPIN:         0 :
:STNO:  6959 :UNIT:   0 :CHRG:00000.00 :DUR: 0. 0. 8 :RD:  8 :TYPE:  OUTGOING :SERV:    NORMAL :TG/NO:6038 :ST/M/D/H/M/S: 4. 3. 0.59.37 :NODECODE:   30 :DESTNO:           1800551702 :PIN:             :COPIN:         0
:

What are you trying to achieve? Can you just use a one of the many call accounting software packages?

hscheff · 06-02-2008, 09:43 AM

Thanks for the replies.
I have since got hold of the info I needed from our local vendor.

We are using a commercial call accounting package, but need to add some functionality which this package does not offer.

kevin906 · 06-03-2008, 11:11 AM

For future reference

mikeraut · 06-03-2008, 12:24 PM

For those in need of a little more detail regarding the assembly of a smdr record, please refer to the attached document. The information is valid for V3.0 and V4.0 of the HiPath 4000.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cable spec for KX-TD290 PRI ?	finbarr	Panasonic	3	04-16-2007 04:36 PM
Call Pilot Server Spec Recommendation Sought	Rachelle	Meridian Systems	5	03-05-2007 10:30 AM
hicom 100 SMDR Pinouts	Vermeulen	Hicom/HiPath	3	12-20-2006 11:32 AM
Looking for tech spec for old MCK Remote Extenders	Rachelle	Meridian Systems	1	07-02-2004 09:16 AM
SCCS 4.2 Spec Sheet	KLocke	Meridian Systems	1	09-11-2003 01:26 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)