Need help about TMCAS-2 for HiPath 3800 V6.0 - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

sonhai2301 · 11-07-2006, 09:19 PM

It's my very first time to config TMCAS-2 for HiPath 3800 V6.0, but I don't have any service manual or userguide document, so I don't know how to config it, don't know how it link with DIUN2 and how it work ...

Please help me to config TMCAS-2 card and share your experience and documents about this card.

Thank you!

sonhai2301 · 11-10-2006, 10:53 PM

No one know about this field???

sonhai2301 · 11-14-2006, 02:02 AM

I searched several time in siemens partner website but don't have any document guide to config TMCAS-2 card.
If you have any document or experience about this please help me.
My email: hai.nguyen-son@ntc.com.vn or sonhai2301@gmail.com

or you can add my YIM nick: sonhai2301 so we can communicate eachother anytime.

sonhai2301 · 11-22-2006, 05:15 AM

I can connect and mornitor TMCAS-2 with CAS manager sofware, but don't know how to synchronous bethween TMCAS-2 and DIUN2, is there any commend? please help !

Thank you !
Hai

***Danbhalah*** · 12-09-2006, 04:29 AM

For V1.0 and later, TMCAS (Trunk Module Channel Associated Signaling) boards can be used in HiPath 3750, HiPath 3700, and HiPath 3550 to support the country-specific CAS protocol.
The board converts the Euro-ISDN protocol on an S2M link into the Channel Associated Signaling (CAS) protocol. The board functions only in connection with a TMS2 (HiPath 3750, HiPath 3700) or TS2 (HiPath 3550). There is no direct connection between the TMCAS board and the system's central control unit. The TMS2/TS2 handles all signaling and data traffic.

Do you have access in engineering mode?

sonhai2301 · 12-10-2006, 08:52 PM

Quote:

Originally Posted by Danbhalah

For V1.0 and later, TMCAS (Trunk Module Channel Associated Signaling) boards can be used in HiPath 3750, HiPath 3700, and HiPath 3550 to support the country-specific CAS protocol.
The board converts the Euro-ISDN protocol on an S2M link into the Channel Associated Signaling (CAS) protocol. The board functions only in connection with a TMS2 (HiPath 3750, HiPath 3700) or TS2 (HiPath 3550). There is no direct connection between the TMCAS board and the system's central control unit. The TMS2/TS2 handles all signaling and data traffic.

Do you have access in engineering mode?

Thank Danbhalah,

You know,The TMCAS-2 card (Trunk Module Channel Associated Signaling) can be used only in HiPath 3800 for V5.0 SMR-10 and later to support country-specific CAS protocols.
In contrast to the predecessor PBXXX card, TMCAS-2 communicates directly with the central control in the system. All signaling and data traffic goes through TMCAS-2. Unlike PBXXX, a connection with an S2M card is therefore not required.

May be you have some mistake between TMCAS (called PBXXX card) for HiPath 37XX and TMCAS-2 for HiPath 3800 V5.0 and later.

Anyway, thank you all very much for your support. The problem is solved.

Regards
Hai

***Danbhalah*** · 12-13-2006, 06:42 PM

I was mistaken but thanks for the reply and glad you got it sorted, some of the onfo from Siemens is sometimes dated.

In the UK it felt as if we were the guinea pigs for onsite siemens installations, what it doesn't work, have you tried defaulting it and trying again, blah, blah , blah!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)