defective Phonemail system 6.4.3 - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

bikkel · 08-31-2006, 02:53 PM

Hi

i'have a problem with a phonemail system 7655 SE(digital)(
after reset the system works +/- .5 hours
the Fan 's are ok) with next fault

-*ROM MONITOR: FATAL SYSTEM ERROR. CANNOT BOOT
END OF ERROR CACHE

and by testing

SVI: Unknown error: @B202ROM CMD?>
Scanning E:, Hit CTRL-X to stop or wait for normal completion4 K.
11584 K through 11648
ATA Error (A1B320) on retry 1 of LBA 0x10401:
12224 K through 12288 K.
Unknown ATA Status Error 0xB320 from Disk Driver.
12352 K through 12416

now i have a few questions
is the HD is defect??
i chanced the HD
when using the IPL disk the system is not comming up
the old HD which was in is a 20.45 gig HD IDE and we chanced for a 40 gig original from Rolm (DEKSTAR)
is ther a problem with the jumpers?
did i get a unformated HD
the new HD type is ( i am not sure and i can check it)IC35L040AVVN0-0 40GB RPM 7200 rot, MLC:H6888 P/N 07N8450

so many questions
who can help me!

thanks and the greatings from Holland

rick

PP · 08-31-2006, 07:31 PM

It Sounds Like The Hd Is Bad If You Can Reset And Then After It Comes Up Go Log In And Do A (hde) See If You Need To Reassign Any Lba Also Do A Talog And See If There Is Any Hd Errors On The Talog

PP · 08-31-2006, 07:37 PM

YOU MAY ALSO HAVE GOTTEN A UNFORMATED HD DRIVE, HERE IS A PROCEDURE THAT WILL LET YOU FORMAT THE DRIVE WITHOUT THE FACTORY PASSWORD

Take your IPL disks and look at them on your A: drive on your computer. There is a folder/file called disktool. Here is the fun part. Rename the resetpassword file something else (doesn't matter what) and rename the disktool file ResetPassword (rename it exactly how it was named on the IPL). Next, reboot the phonemail and enter the ROM command mode (p/w = techtest) Enter B to boot and choose to Boot from Floppy. When login prompt comes up, login and enter ?. Choose Resetpassword and baddabing baddaboom, you will access the Disktool. You will be able to format hard drives there.
THIS IS NOT MINE AND I CAN'T TAKE CREDIT FOR IT BUT IT DOES WORK

bikkel · 09-01-2006, 07:21 PM

Thank you for responding.

there where some errors on the disk wich are not fixeble
so we put in a other (new)disk

we are already so far that we can acces the HD with using the IPL disk

i let you the results

bikkel · 09-05-2006, 03:58 PM

we fixed it!
th e hd was defect and de jumper setting from the new disk was wrong(factory was wrong)
everything works properly now!

thanks for help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A Hackers Guide to the SL-1	rixride	Meridian Systems	6	09-26-2008 01:02 PM
VoIP Phone Systems Buyer's Guide	rixride	VOIP Talk	3	02-17-2006 01:44 PM
8.2	telman22	Inter-Tel	2	12-21-2004 10:34 AM
May i have your help??	arnoldjos	Meridian Systems	5	09-22-2004 06:23 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)