Should be an easy one.... - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

PD · 07-28-2003, 08:03 AM

I have some Partner parts and I'm wondering if they are compatible. Can someone please tell me if these will work together. I found all these parts in one of my storage rooms and figured it wont hurt to try to learn this thing! Here is what I have:

5-slot cabinet
ACS Proc. R4.0
Partner Mail VS R5.0
2 - 206 Module R2.0
1 - 400E Module R3.1

I also have two phones....Partner 34D..?..?

Any help would be appreciated!

Thanks!

BassetHound · 07-28-2003, 03:36 PM

You need to check the label on the side 5 slot to see if it says acs. If it doesn't you will need to get a different cabinet.
The ACS R4.0 will work with the VS R5.0, 206, and the 400E cards.
The older 206 cards sometimes get noisey with age, just some thing to keep in mine.

PD · 07-29-2003, 07:40 AM

THANKS!!!!

OK, I'm just using this for learning and/or testing purposes only. The cabinet does NOT say acs, but, when I plug in the ACS R4.0 and plug in a phone, it works. Will this work for learning purposes?

thanks!

telprog · 07-29-2003, 04:48 PM

You should be ok as long as the power lights come up and you can plug a phone into the ports and they work. Your earlier 5slots do work with ACS, there is a cut off date but I don't remember when it was. But it sounds like your ok.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is the easy way?	Zaib	Asterisk Systems	4	08-31-2006 10:31 PM
This one is easy for most of you	Ancient1	Meridian Systems	3	08-29-2006 12:49 PM
Easy one....	scott	Meridian Systems	4	06-06-2006 02:51 PM
Easy question for WC guru	rwhite	Contact Center Symposium and ACD	5	03-22-2006 09:35 AM
Crackberry users can rest easy.	rixride	Off Topic - Humor/Jokes	10	03-06-2006 09:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)