sncsnc

are you a do it your self er or a vendor?

OBT

are they on the same site?
do you have a pri in both systems?
What is a "ext expansion network connection".

izharj

yes, they on same site and location.. EENC is expand subscriber ext no range... eg. from 100 -400..

OBT

Have you setup a different number ranges on each system and set up lead number for each unit in number plan and set up pri for qsig master and slave
I have never heard of eenc. All kxtda systems can use number range 100 - 400 as standard

izharj

yes, i'm using different number range, setup lead number for both.. and has setup pri qsig master/ slave.. and same COS.. all can make outside call..

OBT

Is the pri for the interconnect in a different trunk group than your external lines are on
Have you set up number translation in private network i.e. dial 2 and it goes out on co group 2 the pri used to connect the systems

izharj

yes.. pri using different group and it's on.. and 'number translation' u mean leading number in tie table under private network? yes.. ie.. when user dial tda-b ext no starts with 3 it will goes to trunk 2..

OBT

Have you entered any thing in own pbx code box

izharj

i manage to solve the problem yesterday... thanks to all my fren.. .
need to re-initialize again and reprogrammed.... fuh.. lot of work to do....