Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > Panasonic
Reload this Page tda 600 Digital signal synchronization
   SEARCH  
     
User Name Password      
Save ?
Panasonic Post Questions and Answers about Panasonic systems and products. i.e.: Telephone Hybrid/PBX Systems KX-T, KX-TA, KX-TD Voice Mail Systems KX-TVS, KX-TVA


Avaya Compliant Solutions   Nortel Compatible Products    Cisco Compliant Solutions   Free Call Accounting Quotes

Reply
Page 1 of 2 1 2 >
 
LinkBack Thread Tools Display Modes
Old October 19th, 2008   #1 (permalink)
Junior Member

Activity Longevity
0/20 7/20
Today Posts
0/0 ssssssss9
Rep Power: 0scallywag is a newbie
Gender:
Country:
Cool tda 600 Digital signal synchronization
I have a tda600 installed [uk] using isdn30e [BT provided].
It has worked perfectly on an isdn simulator for a couple of weeks.
Now it's installed on site it is producing a major alarm regarding the isdn.
I'm not sure whether the problem actually causes calls to drop because I've not seen it do it whilst calls are in progress.

Below is the overnight smdr which shows what is happening.
Does anyone know wgat's happening and what I can do about it?

18/10/08 04:27PM MN ALM #301 10901 Digital trunk RAI reception
18/10/08 04:27PM MN ALM #390 10901 Digital signal synchronization established
18/10/08 11:33PM MN ALM #301 10901 Digital trunk RAI reception
18/10/08 11:33PM MN ALM #390 10901 Digital signal synchronization established
19/10/08 06:56AM MN ALM #301 10901 Digital trunk RAI reception
19/10/08 06:56AM MN ALM #390 10901 Digital signal synchronization established
19/10/08 06:56AM MN ALM #301 10901 Digital trunk RAI reception
19/10/08 06:56AM MN ALM #390 10901 Digital signal synchronization established
19/10/08 06:56AM MN ALM #301 10901 Digital trunk RAI reception
19/10/08 06:56AM MN ALM #390 10901 Digital signal synchronization established
19/10/08 07:11AM MN ALM #301 10901 Digital trunk RAI reception
19/10/08 07:11AM MN ALM #390 10901 Digital signal synchronization established
19/10/08 08:54AM MN ALM #301 10901 Digital trunk RAI reception
19/10/08 08:54AM MN ALM #390 10901 Digital signal synchronization established
scallywag is offline   sendpm.gif Reply With Quote
Old October 19th, 2008   #2 (permalink)
OBT
Senior Member
 
OBT's Avatar
OBT is Getting older but not wiser

Activity Longevity
12/20 6/20
Today Posts
0/0 ssssss878
Location: Kilkenny
Rep Power: 3OBT is on a distinguished road
Gender:
Country:
Try changing the cable between the system and the modem. But it sounds like a bt problem have you contacted them?
Also check that the clock priorty is set to the pri card
OBT is offline   sendpm.gif Reply With Quote
Old October 19th, 2008   #3 (permalink)
Junior Member

Activity Longevity
0/20 7/20
Today Posts
0/0 ssssssss9
Rep Power: 0scallywag is a newbie
Gender:
Country:
I'm going there tomorrow [monday]

I've reported the fault to BT [just now] as a clock sync error.

When I get there I'll change out the lead between the NTE and the switch [5metre cat5 lead: RJ45 to RJ45]
scallywag is offline   sendpm.gif Reply With Quote
Old October 19th, 2008   #4 (permalink)
Moderator
 
sncsnc's Avatar
sncsnc is Tired

Activity Longevity
17/20 20/20
Today Posts
0/0 sssss1625
Location: The Berkshires Western,MA
Rep Power: 9sncsnc is on a distinguished road
Gender:
Country:
the lead is not a rj45 rj stands for jack ....
sncsnc is offline   sendpm.gif Reply With Quote
Old October 20th, 2008   #5 (permalink)
OBT
Senior Member
 
OBT's Avatar
OBT is Getting older but not wiser

Activity Longevity
12/20 6/20
Today Posts
0/0 ssssss878
Location: Kilkenny
Rep Power: 3OBT is on a distinguished road
Gender:
Country:
sncsnc, it is in the uk, an off the shelf patch lead. Rj 45 is the 8 pin plug and if you want a jack you ask for a rj45 socket or module
Last edited by OBT; October 20th, 2008 at 03:38 AM.
OBT is offline   sendpm.gif Reply With Quote
Old October 20th, 2008   #6 (permalink)
Moderator

Activity Longevity
13/20 14/20
Today Posts
0/0 ssssss630
Location: NW Ohio
Rep Power: 6Cnavarro is on a distinguished road
Gender:
Country:
Pix? Links? I'd like to see one of those.

Also, what's the part number of your 824 and is it Loop C.O. only like ours? Is it the same 308 base and 2 expansion cards?

TIA



cn
Cnavarro is offline   sendpm.gif Reply With Quote
Old October 20th, 2008   #7 (permalink)
OBT
Senior Member
 
OBT's Avatar
OBT is Getting older but not wiser

Activity Longevity
12/20 6/20
Today Posts
0/0 ssssss878
Location: Kilkenny
Rep Power: 3OBT is on a distinguished road
Gender:
Country:
Carl, I think your replied is in the wrong thread?
OBT is offline   sendpm.gif Reply With Quote
Old October 20th, 2008   #8 (permalink)
Moderator
 
sncsnc's Avatar
sncsnc is Tired

Activity Longevity
17/20 20/20
Today Posts
0/0 sssss1625
Location: The Berkshires Western,MA
Rep Power: 9sncsnc is on a distinguished road
Gender:
Country:
RJ is a usoc term that stands for Registered jack like rj21x I know what he was referring to but the proper term is a 8 conductor patch cable...
sncsnc is offline   sendpm.gif Reply With Quote
Old October 21st, 2008   #9 (permalink)
OBT
Senior Member
 
OBT's Avatar
OBT is Getting older but not wiser

Activity Longevity
12/20 6/20
Today Posts
0/0 ssssss878
Location: Kilkenny
Rep Power: 3OBT is on a distinguished road
Gender:
Country:
maybe in the USA but here it is a rj45 a 4 wire lead is a rj11
Hay shawn let's not fall out over a cable, I was just letting you know what we call it here
OBT is offline   sendpm.gif Reply With Quote
Old October 21st, 2008   #10 (permalink)
Moderator
 
sncsnc's Avatar
sncsnc is Tired

Activity Longevity
17/20 20/20
Today Posts
0/0 sssss1625
Location: The Berkshires Western,MA
Rep Power: 9sncsnc is on a distinguished road
Gender:
Country:
Quote:
Originally Posted by OBT View Post
maybe in the USA but here it is a rj45 a 4 wire lead is a rj11
Hay shawn let's not fall out over a cable, I was just letting you know what we call it here
no fallout mate a usoc 8 wire flat line cord here has a twist in it
and is used strictly for alarm connection ,dialers and to the smart jack to the csu from the csu to the t1 or pri card
sncsnc is offline   sendpm.gif Reply With Quote
Reply
Page 1 of 2 1 2 >

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
cpc signal anthp Panasonic 1 August 13th, 2008 02:07 PM
NTP Synchronization with Meridian 81c ksatish80 Meridian Systems 1 August 3rd, 2007 07:56 AM
Two DS1, One Synchronization problem Archibald J. Cox Definity, S87xx, CM 3 June 28th, 2007 05:34 PM
MAT synchronization waleezo Meridian Systems 8 December 15th, 2004 07:58 AM
NETWORK SYNCHRONIZATION Meridian Systems 4 July 24th, 2003 07:09 AM


All times are GMT -4. The time now is 06:15 AM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...