rivet

the manuls are in the box ....Da
i can but assume you are an end user..but before anyone could help you we would need to know what kind of cards you intend to install into the system.
before you start you will need the following
1. pc or laptop
2. pc programming software (not included with system)
3 an sd card reader (to make a full card backup in the event you damage the one that comes with the system
4. time to read and understand the manual.

peter

sncsnc

if you are in the really in the states you must use a certified dealer!!

faisalusuf

Dear rivet,

There is no installation manual or Documentation just jo manuals of panasonic phone with button board is available. there are five cards with the following technical details:

1) MSLC 16
Kx-TDA 0174/0175
2) MSLC 16
Kx-TDA 0174/0175
3) MSLC 16
Kx-TDA 0174/0175
4) DHLC 8
KX-TDA 0170/0171/0173

5) LCOT 16
KX-TDA 0181 (Mainboard number)
KX-TDA 0189/0193 (Mounted on that board)

When i'm pluging the phone came along with this unit at the ports given on the cards PFT1 PFT2 then there is no activity. Why this is happening the unit is booting and runing properly but the phone kx-t7636 is not functioning at all.

If there is link the guide on the web or you have any solution or ideas regarding this problem kindly let me know that


Regards

Faisal

sncsnc

were did you buy the system?

rivet

the cause it mostlikly the wrong phone in the wrong port

the mslc cards x3 = single line phones these are like house phons

the DHLC card is for the Digital phones the bigger phones

you should follow the cable from the system down to your patch panel(where you plug in) then plug your first kx-t7636 here.

i to would like to ask the question posted by sncsnc

where did you get this from was it built and then shiped to you
if so can you contact him for the manuals as they should be with the system . getting this part setup is the easy part and you could end up in a real fix without the info
i will try to help as much as possible but away for 2 weeks from next week.
try above and let us know


peter doyle

faisalusuf

thnks to reply I've installed the hardware successfuly and i need to know how to manage the calls all the extension are working fine
but operator code is not working its 9 bell rings but no bell on DPT

rivet

1 x questions unanswered??

where did you get this from was it built and then shiped to you
if so can you contact him for the manuals as they should be with the system . getting this part setup is the easy part and you could end up in a real fix without the info

you will need the system software now to program the system Did you get some yet.

peter

Cnavarro

Isn't Karachi in Kansas???

Carl "maybe you should let some of the internationals handle this" Navarro

sncsnc

Carl FYI when he originally posted his profile showed that he was in the USA!!
thats why I said if you were really in the US knowing that he was not....