Rey

Hello anybody,

Who can help me? How can i Install a new software CS1000M downloaded to the nortel website by using PIC access. the system is option 11C CS1000M release 4.00t. I've used pcmcia pretec ATA Flash 320MB to Install a new software to the SSC but the error response during the installation is " Cannot open the Volume " and the system cannot load a new patch.

This is the output of the system during the installation.

Security ID: 10288798 type: NT_STD
System ID: 10288798
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00FFFFFFF9:E4:AD:44
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***


Communication Server 1000 Software
Release : x210400t
Created : Thursday September 16 08:23:35 EDT 2004
Loaded : 17/6/06 14:01:40

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup, tid = 0
x207373b8 , pc = 0x10134830
BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup,
tid = 0x207373b8 , pc = 0x10134862

BUG6017 OS 0: WARNING "Packages not read"


BUG7436 OS 0: WARNING "Bad Reason Data"

ERROR: Cannot create path "c:/u/rpt/".
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
0x207373b8 (tStartup): rptInit: Failed to initialize report log server.

BUG7460 OS 0: WARNING "RPT Init"

Unable to find startup script.
PCH0309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH0201: WARNING: can not initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

Unable to start SL1.
OS will be restarted in 5 seconds.

To start PDT type CTRL-P ...
0
Warm Start begun - reason 25



*** OS RESTART ***


Communication Server 1000 Software
Release : x210400t
Created : Thursday September 16 08:23:35 EDT 2004
Loaded : 17/6/06 14:01:51
Last Restart: 17/6/06 14:01:51
Current Time: 17/6/06 14:02:33

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.

BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup, tid = 0
x207373b8 , pc = 0x10134830
BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup,
tid = 0x207373b8 , pc = 0x10134862

BUG6017 OS 0: WARNING "Packages not read"



System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r11 dev2.54
Reset Reason: C0, 0 - Reset due to Power Up
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10288798 type: NT_STD
System ID: 10288798
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00FFFFFFF9:E4:AD:44
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
CONTROL-I entered. Invoking install setup program from SW Delivery Card.
DRAMOS load from SW Delivery Card failed.
Verifying Diskos.


*** OS RESTART ***


Communication Server 1000 Software
Release : x210400t
Created : Thursday September 16 08:23:35 EDT 2004
Loaded : 17/6/06 14:04:22

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup, tid = 0
x207373b8 , pc = 0x10134830
BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup,
tid = 0x207373b8 , pc = 0x10134862

BUG6017 OS 0: WARNING "Packages not read"


BUG7436 OS 0: WARNING "Bad Reason Data"

ERROR: Cannot create path "c:/u/rpt/".
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
0x207373b8 (tStartup): rptInit: Failed to initialize report log server.

BUG7460 OS 0: WARNING "RPT Init"

Unable to find startup script.
PCH0309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH0201: WARNING: can not initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"



SOFTWARE INSTALLATION PROGRAM
************************************
Verify
Security ID: 10288798
************************************

Call Server/Main Cabinet Software Installation Main Menu :
1. New Install or Upgrade from Option 11/11E - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 4

Communication Server 1000 Software Rls 400T will be installed.

Does this System have a Signaling Server ? : (y/n/[a]bort) : N


Select Feature Set You Wish to Enable :
1. AsiaPac Business Services-L1 (ntsk40cb)
2. AsiaPac Enhanced Business Services-L2 (ntsk40db)
3. AsiaPac Adv. Call Centre Services-L3A (ntsk40eb)
4. AsiaPac Adv. Networking Services-L3B (ntsk40fb)
5. AsiaPac Premium Network Services-L4 (ntsk40gb)
6. EMEA Business Services-L1 (ntsk40hb)
7. EMEA Enhanced Business Services-L2 (ntsk40ib)
8. EMEA Adv. Call Centre Services-L3A (ntsk40jb)
9. EMEA Adv. Networking Services-L3B (ntsk40kb)
10. EMEA Premium Network Services-L4 (ntsk40lb)
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 1

Feature Set Selection : AsiaPac Business Services-L1

Do you wish to install Dependency Lists? (y/n/[a]bort) : Y

Do you wish to add packages? (y/n/[a]bort) : Y

Summary of packages selected :
0-1 4-5 7-14 16-21 23-25 28-29 32-36 40-41 44-49 51-56 58-59 61 64
70-77 79-81 83 87-93 95 98-105 107-111 113 115 117 119-120 122 124-125
127-129 132-134 137-141 144-146 150-151 153-154 157 160-164 167 169-170
173-174 179-182 184-187 191 193 195 198 200 202-206 208 210-212 214-216
218 222 229 233-236 240 242-243 245-247 250-251 253-256 258-259 261
283 289 294-296 301 308 310 315 323-324 327-328 332-333 347 349-350
362 364 380-381 384 386 389 397-398 400


Enter additional packages : <cr> to continue
131


Your feature set selection is "AsiaPac Business Services-L1" :
Additional packages selected :
131
Summary of packages selected :
0-1 4-5 7-14 16-21 23-25 28-29 32-36 40-41 44-49 51-56 58-59 61 64
70-77 79-81 83 87-93 95 98-105 107-111 113 115 117 119-120 122 124-125
127-129 131-134 137-141 144-146 150-151 153-154 157 160-164 167 169-170
173-174 179-182 184-187 191 193 195 198 200 202-206 208 210-212 214-216
218 222 229 233-236 240 242-243 245-247 250-251 253-256 258-259 261
283 289 294-296 301 308 310 315 323-324 327-328 332-333 347 349-350
362 364 380-381 384 386 389 397-398 400

Is this correct? (y/n/[a]bort) : Y

Select Database to Install :
1. Pre-Configured database - AsiaPac Business Services-L1
2. Basic Configuration
3. Archived database
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 1

Database Selection : Pre-Configured database - AsiaPac Business Services-L1

Licenses will be set to :
TNS ( 2500)
ACDN ( 300)
AST ( 1)
LTID ( 0)
RAN CON ( 0)
RAN RTE ( 500)
MUS CON ( 0)
BRAND ( 2)
ACD AGENTS ( 10)
ANALOGUE TELEPHONES ( 0)
ATTENDANT CONSOLES ( 2500)
BRI DSL ( 150)
CLASS TELEPHONES ( 0)
DATA PORTS ( 2500)
DIGITAL TELEPHONES ( 0)
IP USERS ( 0)
BASIC IP USERS ( 0)
PHANTOM PORTS ( 2500)
DECT USERS ( 0)
DECT VISITOR USERS ( 0)
ITG ISDN TRUNKS ( 0)
TRADITIONAL TRUNKS ( 2500)
TMDI D-CHANNELS ( 64)
SURVIVABILITY ( 0)
PCA ( 0)
H.323 ACCESS PORTS ( 0)
SIP ACCESS PORTS ( 0)

Do you wish to change any Licenses? (y/n/[a]bort) : Y

Enter new Licenses, <cr> to leave unchanged :
TNS ( 2500) -
ACDN ( 300) -
AST ( 1) -
LTID ( 0) -
RAN CON ( 0) -
RAN RTE ( 500) -
MUS CON ( 0) -
BRAND ( 2) -
ACD AGENTS ( 10) -
ANALOGUE TELEPHONES ( 0) - 160
ATTENDANT CONSOLES ( 2500) -
BRI DSL ( 150) -
CLASS TELEPHONES ( 0) -
DATA PORTS ( 2500) -
DIGITAL TELEPHONES ( 0) - 32
IP USERS ( 0) - 4
BASIC IP USERS ( 0) -
PHANTOM PORTS ( 2500) -
DECT USERS ( 0) -
DECT VISITOR USERS ( 0) -
ITG ISDN TRUNKS ( 0) -
TRADITIONAL TRUNKS ( 2500) -
TMDI D-CHANNELS ( 64) -
SURVIVABILITY ( 0) - 1
PCA ( 0) -
IP PEER H.323 TRUNKS( 0) -
SIP ACCESS PORTS ( 0) -

New Licenses:
TNS ( 2500)
ACDN ( 300)
AST ( 1)
LTID ( 0)
RAN CON ( 0)
RAN RTE ( 500)
MUS CON ( 0)
BRAND ( 2)
ACD AGENTS ( 10)
ANALOGUE TELEPHONES ( 160)
ATTENDANT CONSOLES ( 2500)
BRI DSL ( 150)
CLASS TELEPHONES ( 0)
DATA PORTS ( 2500)
DIGITAL TELEPHONES ( 32)
IP USERS ( 4)
BASIC IP USERS ( 0)
PHANTOM PORTS ( 2500)
DECT USERS ( 0)
DECT VISITOR USERS ( 0)
ITG ISDN TRUNKS ( 0)
TRADITIONAL TRUNKS ( 2500)
TMDI D-CHANNELS ( 64)
SURVIVABILITY ( 1)
PCA ( 0)
H.323 ACCESS PORTS ( 0)
SIP ACCESS PORTS ( 0)

Is this correct? (y/n/[a]bort) : Y

Security ID : 10288798
Current AUX ID : 10288798

Do you wish to change the AUX ID? (y/n/[a]bort) : N
New AUX ID : 10288798

Select M3900 Language Set :
1. Global 10 languages
2. Western Europe 10 languages
3. Eastern Europe 10 languages
4. North America 6 languages
5. Spare Group A
6. Spare Group B
7. Packaged languages
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 1

New Installation Information Summary :
Security ID : 10288798
Aux ID : 10288798
Cabinet Type : Call Server/MAIN
Feature Set : AsiaPac Business Services-L1 (ntsk40cb)
Additional Pkgs : 131
Database : Pre-Configured database - AsiaPac Business Services-L
1
CS 1000 CS 1000
S/W Release : n/a 400T
Licenses
TNS : 2500 2500
ACDN : 300 300
AST : 1 1
LTID : 0 0
RAN CON : 0 0
RAN RTE : 500 500
MUS CON : 0 0
BRAND : 2 2
ACD AGENTS : 10 10
ANALOGUE TELEPHONES : 0 160
ATTENDANT CONSOLES : 2500 2500
BRI DSL : 150 150
CLASS TELEPHONES : 0 0
DATA PORTS : 2500 2500
DIGITAL TELEPHONES : 0 32
IP USERS : 0 4
BASIC IP USERS : 0 0
PHANTOM PORTS : 2500 2500
DECT USERS : 0 0
DECT VISITOR USERS : 0 0
ITG ISDN TRUNKS : 0 0
TRADITIONAL TRUNKS : 2500 2500
TMDI D-CHANNELS : 64 64
SURVIVABILITY : 0 1
PCA : 0 0
H.323 ACCESS PORTS : 0 0
SIP Access Ports : 0 0

M3900 Language Set : 1. Global 10 languages

Is this correct? (y/n/[a]bort) : Y
Enable Automatic Centralized Software Upgrade? (y/n/[a]bort) : N

Enter new keycodes :
Key 1 : 20771710
Key 2 : 54525407
Key 3 : 04625536

Keycode validation successful.


*** WARNING *** A system restart will be invoked
as part of the software installation process.

Are you sure you wish to perform the installation? (y/n/[a]bort) : Y
..
Rebooting....

Error opening the volum ( error Problem during rebooting ).

System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r11 dev2.54
Reset Reason: 80, 6 - Reset due to CP and AP invoked reset
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10288798 type: NT_STD
System ID: 10288798
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00FFFFFFF9:E4:AD:44
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DRAMOS loading from SW Delivery Card due to Install Setup program.
DRAMOS load from SW Delivery Card failed.
Verifying Diskos.


*** OS RESTART ***


Communication Server 1000 Software
Release : x210400t
Created : Thursday September 16 08:23:35 EDT 2004
Loaded : 17/6/06 1402

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup, tid = 0
x207373b8 , pc = 0x10134830
BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup,
tid = 0x207373b8 , pc = 0x10134862

BUG6017 OS 0: WARNING "Packages not read"


BUG7436 OS 0: WARNING "Bad Reason Data"

ERROR: Cannot create path "c:/u/rpt/".
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
0x207373b8 (tStartup): rptInit: Failed to initialize report log server.

BUG7460 OS 0: WARNING "RPT Init"

Unable to find startup script.
PCH0309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH0201: WARNING: can not initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

Unable to start SL1.
OS will be restarted in 5 seconds.

To start PDT type CTRL-P ...
0
Warm Start begun - reason 25



*** OS RESTART ***


Communication Server 1000 Software
Release : x210400t
Created : Thursday September 16 08:23:35 EDT 2004
Loaded : 17/6/06 1415
Last Restart: 17/6/06 1415
Current Time: 17/6/06 1458

Copyright(C) 1972-2004 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.

BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup, tid = 0
x207373b8 , pc = 0x10134830
BUG6343: Unable to initialize drive. pDrv = 0x200b425c, task = tStartup,
tid = 0x207373b8 , pc = 0x10134862

BUG6017 OS 0: WARNING "Packages not read"


BUG7436 OS 0: WARNING "Bad Reason Data"

ERROR: Cannot create path "c:/u/rpt/".
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
0x207373b8 (tStartup): rptInit: Failed to initialize report log server.

BUG7460 OS 0: WARNING "RPT Init"

Unable to find startup script.
PCH0309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
Couldn't open loadware patch file "c:/u/loadware/reten/loadware.pch"
PSDL.REC doesn't exist, rebuilding...