NEC integration with Dialogic - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

ToneJockey · 05-09-2005, 10:41 AM

I need some info from you NEC gurus out there. I am going to integrate a Dialogic D/240 JCT digital card with an NEC PBX. The catch is that I am needing to configure it as a D4/AMI Loop start digital station. I need to know what kind of card in the NEC world will provide this. For those ho may have their feet in both worlds, in the Nortel world it is a NT5D11 Line side station card. Thanks in advance.

dassa · 05-09-2005, 07:03 PM

Hi;

If i read this correct, you will need a 30 DTS with firmware SP3399.

This is a 30 channel digital tie line card, where the actual trunks are programmed as digital extensions, and a channel/trunk can be siezed via loop start.

Hope this help.

P.S. I am in AUS, so the names etc may be different.

ToneJockey · 05-10-2005, 06:24 AM

Thanks, that is heading in the right direction I think. I should have specified that I need to prgoram the lines as single line, or analog stations. Does this card support this? Also, just for my knowledge, is the card you mentioned E-1? Most US T1 hardware is 24 stations.

dassa · 05-10-2005, 05:40 PM

Hi;

Yes the cct's on the card are programmed as stations, allowing you to ring individual ccts/trunks directly.

As far as E1/T1, as i am in AUS, we use E1 here, the full 30 channels. I would assume, as the card here is called a 30 DTS, you mave have a 24 DTS ??? over there which, with the same firmware revision SP3399, could essentially do the same thing.

Maybe a local NEC tech centre could answer the question with more local knowledge.

Happy programming...

ToneJockey · 05-10-2005, 10:05 PM

It won't be me doing the programming, thank God. 'Sides, I'm a Nortel guy.

Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Avaya settings for Dialogic t1 interface	stevedialx	Definity Support	9	08-04-2006 01:27 PM
WTB: Dialogic and Brooktrout Boards	Rick Davis	Wanted to Buy	0	08-03-2006 12:51 AM
NEC Manual	stephenyeong	NEC	7	07-24-2006 12:28 PM
Tenant Change on NEC 2000IVs	Chinolee112	NEC	2	07-21-2006 02:43 PM
Dialogic integration options		Meridian Systems	4	10-28-2005 01:13 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)