Need to use IP Phones with IPS 2000 - VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community

bosko · December 9th, 2009

We have a Neax IPS 2000 PBX. It currently has all analog and digital Dterm E phones.

I we need to put some phones in a new building that has network wiring installed already.

What hardware and licensing will I be expected to aquire for this to work?

I have a M606 Ethernet card for the CPU already.

I heard that I am unable to purchase licensing for this model from NEC as it is end of life, however i dont not know if this is true...

R4+Z · December 10th, 2009

The IPS has been superceeded by the 8300 but is far from end of life. Speak to your dealer as it isn't just hardware you need, it is also licensing as you say. Also the M606 isn't what you need for IP phones, you need an IPPAD.

peporter · December 29th, 2009

As R4 stated but was also incorrect, you do need IP seat licenses 1 for each phone that you want logged in at a time. (if you have 5 ip phones, and you want all 5 up and running at 1 time then you need 5 licenses, IP Pad Licenses and if not provided already an 8 or 32 IPLA pad card. the Pad Licenses are for each channel you want active on the IPLA (pad card). 8 channels is 8 licenses. Also do not throw away the M606 card. You need that attached to the CPU inorder for the phones to locate there DRS.

Hope this helps you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Documentation/legal speak regarding dB levels of 2000 series phones	Rachelle	Meridian Systems	7	January 7th, 2010 12:04 PM
Need Steps to add NEAX 2000 Phones/DTerm Series E Extensions	nelgom	NEAX 2000 IVS(2)/ IPS	7	July 28th, 2009 03:33 PM
2400 to 2000 to 2000 CCIS	dwoodyard	NEC	0	June 3rd, 2009 01:42 PM
Need Steps to add NEAX 2000 Phones/DTerm Series E Phones	l33tMonkey	NEC	3	July 1st, 2008 11:55 PM
Norstar Door Phones - Won't ring phones	McNice	BCM and Norstar	3	November 15th, 2005 11:19 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)