acejavelin

Mitel has an interop document on this on their website, I will try to post it here if you do not have access to mitel.com

Mitel 3300ICP - Cisco Call Manager.pdf

I haven't done this but I just saw it was updated on Tech Support's "Whats New" page the other day so it was fresh in my mind.

Hope it helps...

__________________
Telephony users cannot gain anything without first giving something in return. To obtain a useful feature, a feature of equal value must be lost.

This is Telephony’s First Law of Equivalent Exchange.

bobcheese

looks good Acejavelin . I would also imagine it could be achieved with a qsig link to an E1 interface on a cisco router.

acejavelin

I would think so... any TDM networking should work to any PBX that supports the interface. I have setup the 3300 to Avaya, Nortel, Inter-Tel, and maybe a few other systems that way, so I would assume the Cisco would be very similar using ISDN.

__________________
Telephony users cannot gain anything without first giving something in return. To obtain a useful feature, a feature of equal value must be lost.

This is Telephony’s First Law of Equivalent Exchange.

dryaquaman

At one time we had our 3300 set up QSIG to our CM. Worked ok. Issues with the actually hardware we connected to so we can to reboot the Cisco gateways about once every two weeks.
If I remember correctly, Voice Mail worked ok but message waiting lamps never worked. VM on 3300.

Dry Aquaman