KMETECH

if you have to ask this question you shouldn't be maintaining that switch.

alarouche

I have to agree with this guy!
Try to find your manual here and post your new questions!!!

Let me know if you can't find the manuals I'll send you a link

adriskell

Please help me and spare the elitism guys. I am plenty experianced on other systems just not this one. My local vendor is on crack and there are no future classes for this sx2000 model. If this is a forum for questions.... one has been posed.... Any answers out there?

Now, more directly.
I can redirect the default ports (currently on prn3). I can que up a report. I can even enter ENable Print /Nonqueued. However that terminal screen remains blank(minus a few instructions about how to back out) and when I return to the command console the message states "FORMPRINT:Operation terminated by user".

Someone please help?

funkymonkeyfc

When you have done the formprint command, enter ENable Port, then press esc and Q, this should then print to whatever you are using to connect. Let us know how you get on.

adriskell

Thanks Funky.

Did you mean to say "enable print"? This pretty much does nothing new.

I should mention that I am using Putty (term emulator) to connect through IP to the system. A tech told me that I should be able to output the FORMPRINT command to the terminal screen and then do a screen capture to get the info. Can anyone verify this?

PS. I have no printer

funkymonkeyfc

Hmmm, i use Procomm and Hyperterminal, deffo works on Procomm. When you enable port, does the screen change? if so then esc Q on Procomm would enable screen capture, if not then try and get Procomm and ill do a script for you and mail over.

alarouche

Ex:
FO cla of ser /instance 30 /port LPR3
start your capture
en print /queu
quickly press "ESC"
once done press "CTRL + C"

or if you print on LPR1, then have a laptop (with COM port on LPR1) and capture it there

alarouche

The only thing missing is that you have to quickly press the ESC key right after type your EN print command and your will see the form in your terminal!