Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > AVAYA > Merlin
Reload this Page Getting digital phone with my Merlin Model 410 PBX
   SEARCH  
     
User Name Password      
Save ?
Merlin Merlin Magic and Legend Support

Avaya Call Accounting and Avaya Compliant Solutions

Reply
 
LinkBack Thread Tools Display Modes
Old January 15th, 2010   #1 (permalink)
Junior Member

Activity Longevity
2/20 1/20
Today Posts
0/0 ssssssss3
Rep Power: 0skjackman is a newbie
Country:
Getting digital phone with my Merlin Model 410 PBX
It's about 20 years old. Am I out of luck getting it to work? Or are there some settings I can change on it to get it to work with digital phone?
skjackman is offline   sendpm.gif Reply With Quote
Old January 15th, 2010   #2 (permalink)
Junior Member

Activity Longevity
4/20 20/20
Today Posts
0/0 sssssss36
Location: California's Central Coast
Rep Power: 8TouchToneTommy is on a distinguished road
Country:
What "digital phone" are you trying to use?

ALL phone systems use proprietary phones. ie, phones designed to be used with the control unit. So, a Merlin 410 is designed to use Merlin phones.
TouchToneTommy is offline   sendpm.gif Reply With Quote
Old January 18th, 2010   #3 (permalink)
Junior Member

Activity Longevity
2/20 1/20
Today Posts
0/0 ssssssss3
Rep Power: 0skjackman is a newbie
Country:
Sorry, was talking about the actual phone service. I'm getting phone service through my cable provider.
skjackman is offline   sendpm.gif Reply With Quote
Old January 19th, 2010   #4 (permalink)
Junior Member

Activity Longevity
4/20 20/20
Today Posts
0/0 sssssss36
Location: California's Central Coast
Rep Power: 8TouchToneTommy is on a distinguished road
Country:
Ah, then the cable provider will install an "ETMA" which will have an RJ-11 jack to provide the dial tone. Patch this to the Trunk port on your Merlin, and you're good to go.

If you're going to have more than a couple of lines, they might hand it off on a 66-block, and you would run cross connect jumpers to the Merlin.
TouchToneTommy is offline   sendpm.gif Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Merlin Legend Operator's phone doesn't ring half the time dtm255 Merlin 9 August 11th, 2008 04:31 PM
What key is assigned for MWI for IP PHone model i2050. avayapbx Meridian Systems 3 October 27th, 2005 11:13 AM
Merlin Magix: how to block my phone number? tedro Definity, S87xx, CM 1 January 28th, 2005 10:10 PM
Phone model on station form Rhonda Definity, S87xx, CM 8 October 13th, 2004 03:23 PM
Merlin Phone Lines over PRI markj39k Merlin 2 June 5th, 2003 09:33 AM


All times are GMT -4. The time now is 01:22 PM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...