Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > NORTEL > Meridian Systems
Reload this Page PRI to VRU using switch as CO for VRU
   SEARCH  
     
User Name Password      
Save ?
Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications

Tags: , , ,


Free Call Accounting Quotes   PBX Programming Software  Nortel Software  Avaya Products  Cisco Call Accounting

Reply
 
LinkBack Thread Tools Display Modes
Old February 18th, 2004   #1 (permalink)
Junior Member
 
pbxn's Avatar
pbxn is worried being an att contractor

Activity Longevity
1/20 20/20
Today Posts
0/0 ssssss810
Location: hillbilly heaven
Rep Power: 8pbxn is on a distinguished road
Country:
Send a message via Yahoo to pbxn
Hopes this makes sense, as I have been thrown in the middle of this one. I am trying to add a PRI circuit to a VRU, using my option 81C as the CO. Previous people have removed their programming so I am starting from scratch. The PRI requires a DCH, and I have been told the PRI/DCH were established, but when plugged into the equiptment, the circuit drops. Any ideas? Thanks as always for the help
pbxn is offline   sendpm.gif Reply With Quote
Old March 20th, 2004   #2 (permalink)
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 sssssss36
Location: NE
Rep Power: 8fizzywig is on a distinguished road
Country:
Send a message via Yahoo to fizzywig
I have to ask, did you check the VRU units T1 card to see that it is enabled?
fizzywig is offline   sendpm.gif Reply With Quote
Old March 21st, 2004   #3 (permalink)
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 ssssss410
Location: Missouri
Rep Power: 8telecom116 is on a distinguished road
Re: Thanks Guys!
I don't think this will work. This is a similar situation that people have trying to interface with Polycom video units. Unless your VRU can emulate the NET side of a PRI circuit, the workaround is to get a Adtran Atlas 550 with 2 T1/PRI cards. You can then make the Atlas emulate the NET side for both the M1 and the VRU.
telecom116 is offline   sendpm.gif Reply With Quote
Old March 22nd, 2004   #4 (permalink)
Junior Member

Activity Longevity
0/20 17/20
Today Posts
0/0 ssssss215
Location: Wisconsin
Rep Power: 7mark@stjoes is on a distinguished road
Country:
Dont forget about QSIG, if you are QSIG enabled you should be able to network together
mark@stjoes is offline   sendpm.gif Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot switch clocks ERR3056 Meridian Systems 6 August 11th, 2003 11:19 AM
Switch Access acewarlock Meridian Systems 5 July 18th, 2003 09:37 PM
Deleting Voice Mail thru the Switch morpheus Meridian Systems 2 March 11th, 2003 04:42 PM
Changing the phone type in Mat or the Switch paul_h_amiga Meridian Systems 4 February 18th, 2003 10:31 AM


All times are GMT -4. The time now is 05:03 AM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...