Must be the cold.. - PBX Info :: Your Free PBX, PABX and Telephone Information Resource
Home | Register |    
 
Forums         |        Articles          |        Blogs         |      Software          |      Portals          |      Resource          |      Wiki      |    White Papers         
 
Go Back   PBX Info :: Your Free PBX, PABX and Telephone Information Resource > PBX SYSTEMS > NORTEL > Meridian Systems
   SEARCH  
     
User Name Password      
Save ?
Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications

Tags: ,


Reply
 
LinkBack Thread Tools Display Modes
Old 11-19-2002, 01:35 PM   #1 (permalink)
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
Held Calls Drop after 4 minutes

ARRRRG!!!
I can't remember how to hook up (0f all things) a t1 cicruit to an 11c!
Progam I remember...it's the cabling I don't recall.
this is a MegaLink (canada) so it's it's own CSU...but don't remember from the MDF back to the circuit what cabling
HELP
  Reply With Quote
Old 11-19-2002, 02:08 PM   #2 (permalink)
gei_spot
Senior Member
 
gei_spot's Avatar
gei_spot is going phishing

Activity Longevity
13/20 20/20
Today Posts
0/0 sssss5377
Location: Somewhere in this vast universe on a little rock that looks like a grape.
Rep Power: 12gei_spot is on a distinguished road
Gender:
Country:
Held Calls Drop after 4 minutes

Not sure if this helps, but if this is a 2.0 Mb PRI the you will need either NTBK05DA/CA
the DA is 120 ohm twisted pair
the CA is 75 ohm coax

which routes to your CSU/DSU
__________________
I'm a member of the "PbxInfo Gang"
gei_spot is offline   sendpm.gif Reply With Quote
Old 11-19-2002, 03:17 PM   #3 (permalink)
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
How to program a analog phone to restrict incomming calls fr

Err...I'm feeling very stupid.
WHAT?

Ok...TMDI card (that will run it) in card slot 1 (cab. 0)
Tell me if this sounds right?
Punch down the next to last two pairs on the MDF of 1 for one pair running to the net side of the CSU, the two pairs infront of that for the other side?

Or am I way off...Been so so long since I've installed one, and (of course) can't find my notebook on it. :casstet:
  Reply With Quote
Old 11-19-2002, 04:17 PM   #4 (permalink)
Reusser
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 sssssss24
Location: Seattle, Washington
Rep Power: 7Reusser is on a distinguished road
Building new Loops

50 pin on db15 signal description
Pin 48 pin 1 T Transmit TIP to network

Pin 23 Pin 9 R Transmit RING to network

Pin 49 Pin 3 T1 Receive TIP from Network

Pin 24 Pin 11 R1 Receive RING from Network
Reusser is offline   sendpm.gif Reply With Quote
Old 11-19-2002, 04:18 PM   #5 (permalink)
gei_spot
Senior Member
 
gei_spot's Avatar
gei_spot is going phishing

Activity Longevity
13/20 20/20
Today Posts
0/0 sssss5377
Location: Somewhere in this vast universe on a little rock that looks like a grape.
Rep Power: 12gei_spot is on a distinguished road
Gender:
Country:
Dialing 911

ok hope this helps...

50 pin MDF connector pin 48 to DB15 pin 1 = Transmit tip to network

50 pin MDF connector piin 23 to DB15 pin 9 = Transmit ring to network

50 pin MDF connector piin 49 to DB15 pin 3 = recieve tip from network

50 pin MDF connector piin 24 to DB15 pin 11 = recieve ring from network

50 pin MDF connector piin 25 to DB15 pin 2 = Frame Ground


__________________
I'm a member of the "PbxInfo Gang"
gei_spot is offline   sendpm.gif Reply With Quote
Old 11-19-2002, 04:19 PM   #6 (permalink)
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
Must be the cold..

You gents are the BEST!!! (and let me just say I REALLY HATE CP right now (call pilot) which is where my mind went...trying to get the bloody thing started)
Thanks again
  Reply With Quote
Old 11-20-2002, 02:41 PM   #7 (permalink)
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
i need Meridian PBX help

Right...So I THINK I've got it, but I still can't get it to come up...
any suggestions?
  Reply With Quote
Old 11-20-2002, 04:24 PM   #8 (permalink)
rixride
Admin
 
rixride's Avatar
rixride is replying to forum games...

Activity Longevity
4/20 20/20
Today Posts
0/0 sssss3133
Location: Dallas, Texas
Rep Power: 5rixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud ofrixride has much to be proud of
Gender:
Country:
 
Isdn provisioning

Quote:
Right...So I THINK I've got it, but I still can't get it to come up...
any suggestions?

If you are connecting wires like your avatar shows then you will never get it!
__________________
-=Welcome to PBXInfo=-
-Become a PBXInfo Supporter
-Get more PM Space, Profile Picture, a Signature
-Add yourself to Pbxinfo's Frappr
-Find Nortel Software
rixride is offline   sendpm.gif Reply With Quote
Old 11-20-2002, 04:47 PM   #9 (permalink)
freddog
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 ssssss179
Location: Arizona
Rep Power: 7freddog is on a distinguished road
Country:
Must be the cold..

Quote:
Right...So I THINK I've got it, but I still can't get it to come up...
any suggestions?
Assuming that you know the circuit is good, the only thing I can think of is to make sure that Tx of the CSU goes to Rx of the T-1 card in the opt 11 and, likewise, Rx on the CSU goes to Tx on the T-1 card. Make sure the output of one device goes to the input of the other and vice versa.
freddog is offline   sendpm.gif Reply With Quote
Old 11-20-2002, 04:50 PM   #10 (permalink)
freddog
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 ssssss179
Location: Arizona
Rep Power: 7freddog is on a distinguished road
Country:
Testing Feature

Forgot... out-to-in/in-to-out should be verified for the connection from the carrier's demark to the CSU too.
freddog is offline   sendpm.gif Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cold War cache found in New York JulianW Off Topic - Humor/Jokes 20 03-23-2006 09:51 AM
That's just COLD! Pirates_Ghost Off Topic - Humor/Jokes 4 03-15-2006 10:43 AM
Cold Winter rixride Off Topic - Humor/Jokes 5 03-02-2006 04:16 PM
Which is faster, Hot or Cold? papa-bear Off Topic - Humor/Jokes 13 05-31-2005 10:55 AM
HOW WELL DOES COLD WATER CLEAN? JJ Off Topic - Humor/Jokes 1 02-17-2003 12:34 PM


All times are GMT -5. The time now is 04:40 AM.

Tags   |   Advertise    |    Media Partners   |    Admin   |   About us   |   Contact Us   |   RSS   

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.0.0
Copyright PBXINFO LLC 2006