rixride

I am 99% sure they have to be seperate groups.....but there is that 1%.....hmmm...

What error message are you getting when trying to add a R or V at the end?

__________________
-=Welcome to PBXInfo=-
-Become a PBXInfo Supporter
-Get more PM Space, Profile Picture, a Signature
-Add yourself to Pbxinfo's Frappr
-Find Nortel Software

acewarlock

They must be one or the other, they can't be both. but you could have 2 different DIG on the same phone one VOICE the other RING

ksilliman

That is correct as per the Feature Guide :

Feature description
Dial Intercom (DI) allows a customer to arrange stations within the
Meridian 1 into separate Dial Intercom Groups (DIGs). A total of 100 stations
can belong to each Dial Intercom Group (DIG). One-digit dialing is required
for a Dial Intercom Group (DIG) of up to 10 stations, and two-digit dialing is
required for a DIG of up to 100 stations.
Meridian 1 proprietary telephones can be equipped with a separate DIG key/
lamp pair for each DIG of which it is a member. Single-line telephone users
can belong to only one DIG and may not have any non-DIG Directory
Numbers (DNs).
Voice or ring may be specified on a DIG basis for Meridian 1 proprietary
telephones. If voice is specified, an idle station rings once for two seconds.
The calling party is then connected and may make a voice announcement. If
ring is implemented, normal ringing is received until the called party answers.
This feature provides the option of an announcement or a two-way speech
path.
The ring option must be used if a 500 telephone is a member of the group.