Routing problem - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

JohnnyMod · 12-11-2002, 03:43 PM

I have a new T-1 I built out of an Option 81C which is going to a new Rightfax. The T-1 loop is 45 and rdb is 12. I have ten DN's CDP to RLI 17 which is pointed to Route 12. I can dial the DN and get fax tone but when I dial the whole number it rings the Receptionist. I checked RDB to make sure RCLS=EXT and still nothing. I will be glad when this implementation is over! Does anyone have any Ideas???
:casstet: REQ PRT
TYPE: rdb
CUST 0
ROUT 12

TYPE RDB
CUST 00
ROUT 12
DES RIGHTFAX
TKTP TIE
ESN NO
CNVT YES
DDMI 0
ATDN 566
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
ISDN NO
DSEL VCE
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7012
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 0 *
NDNO 0
DEXT NO
DNAM NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR YES
INC YES
LAST NO
QREC NO
OAL NO
MUS NO
MANO NO

PAGE 002

EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

REQ:
DTA019 34

rhack · 12-11-2002, 04:02 PM

Why do you have an ATDN of 566, and CNVT=YES?

Also what do you mean when you dial the "whole number", are you meaning when you dial the DID number from an external line?

JohnnyMod · 12-11-2002, 04:11 PM

I just changed CNVT=no and that removed the atdn. The whole number is the DID with NPA NXX like you would dial the number from outside the switch.

Steamer · 12-11-2002, 04:38 PM

Could be that the trunks in your DID route don't have an NCOS that will allow them to dial the steering code.

JohnnyMod · 12-11-2002, 05:31 PM

I think I have fixed the problem by changing DSEL from VCE to VOD. It seems to be working, does anyone know why that would affect outside calls from being routed ??? This is a Rightfax Intel board sitting on the other end of my T-1 , so I hope that once it is up and running I wont have ghost problems! Crossing my fingers.

rhack · 12-12-2002, 02:51 PM

If your inbound trunk route DSEL is 3VCE, it may be that your inbound calls were classed as 3.1khz, which prevented the calls from going over the VCE only route.

JohnnyMod · 12-12-2002, 05:11 PM

Thanks Rhack!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Octel routing problem	aikenmarvin	Meridian Systems	2	07-19-2006 05:06 PM
Mailbox routing problem	aikenmarvin	Messaging	1	07-06-2006 07:50 AM
Long Distance Routing Problem	javy_rdz	Meridian Systems	3	09-16-2004 10:06 AM
Routing problem - from PSTN via Meridian to TIE	dominick	Meridian Systems	4	11-11-2003 11:57 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)