Program of keys on M2250 console - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

gitser · 11-11-2003, 09:21 AM

Good afternoon all,

Gitser here, Fairly new to meridian so pls bare with me.. I know this question has been posted a couple of times but I'm looking for baby steps answers if possible plss

Spec : Meridian 11c rls 25

Basically our receptionst has a M2250 console and wants to program the keys on the console to managers ext so that she'll know weather the managers ext is busy or not..Basically when the managers on the phone the console lite will turn on.. I've had an engineer come in and he said it can't be done on the rls we have..

Like I said I'm new to the system so I believed him but now I'm looking for a second opinion

Thanks in advance

Much appreciated

Gitser

**Chas2002** · 11-11-2003, 10:50 AM

There has been a number of post about this subject. I think you're looking for a Busy Lamp Field (see the description that follows)...

I would think that anything above Rls 24 should be able to do it...
I'll research and post back with a more definitive answer.

Chas2002

Busy Lamp Field/Console Graphics Module
The Busy Lamp Field/Console Graphics Module (BLF/CGM) can be added
to an M1250 or M2250 attendant console.
The BLF/CGM can do the following:
— display the status (busy or idle) of up to 150 consecutive extensions
within the Meridian 1 Standard Busy Lamp Field (SBLF)
— display the status (busy or idle) of any hundreds group of DNs within the
system Enhanced Busy Lamp Field (EBLF)
— display which attendant console is the supervisory console and which
consoles are active
— display supplementary information about individual extensions, such as
the reason the person is away (business, vacation, or illness), when the
person is due to return, and an alternate extension where calls to the
person should be directed
— display a company logo
— display graphics
— display text in any one of eight languages
— have its screen contrast adjusted for easy viewing

Installation
The BLF/CGM mounts on the back of the attendant console and is held on by
snapfits and screws. It is connected to the console using a 16-way connector that is located on the keyboard printed circuit board (PCB). This connector is accessed through a rectangular knockout section located underneath the casing overhang at the Meridian logo location.

For more on installing the BLF/CGM, refer to Telephone and attendant
console installation (553-3001-215). For more on the features and operation of the BLF/CGM, refer to the Busy Lamp Field/Console Graphics Module user guide (P0706875).

**Chas2002** · 11-11-2003, 10:54 AM

Couldn't find anything about a specific release that allows BLF or denies BLF.

Did find this in my RLS 24 books..

Quote:

Busy Lamp Field Page 239 of 1518
Feature Packaging
Busy Lamp Field Array (BLFA) is included in base system software.

gitser · 11-11-2003, 11:44 AM

Thanks a mill chas2002, That was exactly what I was looking for.. Much appreciated on that 1..

Cheers

Gitser

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
M2250 Console - Tone dial	TiSwAs	Meridian Systems	2	07-05-2006 02:15 AM
Can the buzz of the M2250 console be heard thru headsets?	thisbig	Meridian Systems	1	06-17-2005 04:41 PM
M2250 Console	epsilon6	Meridian Systems	2	12-15-2004 06:57 PM
Program M2250 console to transfer calls directly to v/m	SYCTEC	Meridian Systems	7	02-09-2004 02:18 PM
M2250 console help	Buffy	Meridian Systems	1	03-25-2003 02:35 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)