Authorization Code/Password? - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

morpheus · 10-16-2003, 12:45 PM

We have a 2616 phone that is in a common place so the NCOS is 2; however, people can make long distance calls by putting a code in 1st. Is there anyway I can find out that code or change it?

Thanks

diversion · 10-16-2003, 01:10 PM

How your NCOS 2 is made ? Does it Allow all and deny specific or the contrary. If the latter you should perhaps change it to prevent use of such a code.
If you have a call accountig software you can perhpas find the code there or in the raw file collected from the PBX.

morpheus · 10-16-2003, 01:46 PM

My mistake, it's a 2008 phone and the NCOS is 1. See below:

DES 2VC18
TN 004 0 00 04
TYPE 2008
CDEN 8D
CUST 0
FDN 7000
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID
ICDD CDMD MCTD CLBD AUTU
GPUD DPUA DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD OCBD FLXD
CPND_LANG ENG
RCO 1
HUNT 7000
LHK 1
LPK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 2250 0 MARP
CPND
NAME STEPHANIE ROBINSON
XPLN 18
DISPLAY_FMT FIRST,LAST
01 SCR 2297 0 MARP
02 TRN
03
04 CFW 4 2204
05 HOT D 4000
06
07
DATE 30 JUL 2003

**Chas2002** · 10-16-2003, 02:03 PM

Goto LD 88 and print your auth codes.

REQ prt
TYPE aut
CUST 0
SPWD (enter security password)
CODE (press return)

CODE 1111 CLAS 005
CODE 2222 CLAS 005
CODE 3333 CLAS 005
CODE 4444 CLAS 005, etc........

All your existing authorization codes will print out.

Next---
With your CDR software there are (2) ways to bill. You can bill against the Prime DN or ACDID or you can use associated billing when using an Auth Code.

1st query the extension of the 2008 and see what the last number was that bypassed your NCOS setting. With that long distance number perform another query to determine which auth code made the call.

If that doesn't work - you may have to delete auth codes until someone complains that his/her auth code isn't working anymore...

Chas2002

morpheus · 10-16-2003, 05:19 PM

I don't know what the Security Password is for the "SPWD" prompt. I tried entering the password that I use to log into the switch, but that didn't work. Do you know how I find out what it is?

Thanks

PP · 10-16-2003, 07:33 PM

THERE IS A DEFAULT WHICH IT MUST LIKELY IS, BUT YOUR GOING TO HAVE TO FIND IT SINCE WE DO NOT POST PASSWORD ON THIS FORUM

***John_In_Dakota*** · 10-16-2003, 08:45 PM

Morpheus,
Can you call your vendor for the password?

Good Luck,
John

**Chas2002** · 10-17-2003, 11:04 AM

Hi - I looked in all the books to see if there is any listing of the default passwords (As PP indicated we shouldn't list them here). If I couldv'e found a listing I wouldv'e pointed you to the appropriate documentation. No avail........You'll need to contact your vendor.
Good luck
Chas

***telecomatt*** · 10-17-2003, 11:58 AM

If you know your level 2 password. you can retrieve it yourself

LD 21
REQ: PRT
TYPE: PWD
PWD2: xxxxxxxx

jack · 10-17-2003, 12:08 PM

PWD
is printed in LD 22, although I didn't think it showed the spwd.

Jack

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Authorization code blues	stech	AVAYA	4	06-29-2006 12:20 PM
Sync Authorization code to more than 1 PBX.	mai_roo_jak	Meridian Systems	2	03-11-2006 10:54 PM
Long distance authorization codes	Lmo	Meridian Systems	3	06-21-2004 02:01 PM
Unable to delete OOSSLT unit...	diversion	Meridian Systems	8	10-20-2003 10:10 AM
AUTHORIZATION CODE IN NETWORK HELP ME PLEASE!!!!!!	marcoch95	Meridian Systems	2	06-17-2003 09:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)