set name when using the second DN - Page 2 - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

Buckshot · 12-09-2002, 08:27 AM

Steamer is correct if you want your OUTBOUND ISDN lines-DID lines to go out as key 0 name. What happens is telco automatically assigns your local (nxx) code to your number, then searches its own database to match up with your last 4 digits being sent. For instance, say your key 0 is 5545 and you are on the nxx 333. When you dial out key 0, telco throws the 5545 onto the 333 and the CLID is then assigned "ABC Co" (in your DID group). However, if you have a roll up number of 6545 that is not in your DID group, then telco automatically does the same process.. tosses the 333 onto your 6545, it then searches its CLID database and tags the name of its records (could be "XYZ Corporation"), and any called person will think the XYZ Corp is calling them. Putting a D (just as Steamer showed in his post) on each successive roll up dn will then hunt up the keystrip to key 00 for CLID. I think this is valid from rls 23 up, but not sure. I know its not on rls 21.

jack · 12-09-2002, 09:25 AM

Read the msg folks this is for internal calls, so CLID doesn't come into play.

Only way to do this is to define a name for each DN in LD 95.

Jack

acewarlock · 12-10-2002, 11:34 AM

Quote by posi511
The user has the 1st line on hold with a customer and need to user the second key.

Are they using key 1 to do a consultion about the caller on key 0 ?.

epsilon6 · 12-11-2002, 06:40 PM

Can anyone post on how to setup CLID??

We have several companies on our switch, but when they dial out to other people, it appears as on main companies line. It not a real big issue to anyone, just kinda annoy the receptionist when everyone calls her saying "Your number was on our caller ID!".

jack · 12-11-2002, 09:28 PM

You need to provide a BUNCH more info. first

Are you using PRI?

Is this a multi-customer switch?

What does your RDB look like?

etc.

Without the above anything you recieve in response will be at best a guess.

Jack

epsilon6 · 01-17-2003, 10:33 PM

We are using 2 T1 lines, and we are not using a multi-customer switch (multi-tenant however). As far as the RDB goes, what type of information do I need to post?? Is ANI possible with a T1?

LD 21
TYPE RDB
CUST 0
ROUT 25
==ALL THE DATA THAT SPILLS OUT==???????????

jack · 01-17-2003, 10:41 PM

P,

Short answer -- longer answer after you end your $$$ to Rix -- set up your clid tables!!

Jack

acewarlock · 01-18-2003, 12:14 PM

epsilon6 is this a new question? if so start a new thread.

acewarlock · 01-18-2003, 12:29 PM

posi211

Does the person putting the caller on hold than call another person just to ask a question, get the answer and then go back to the original caller and thats all?

Lovell · 01-22-2003, 07:39 PM

This sounds way more complicated then it should be. I think in the end he will still need to use LD 95 to set the name for both keys. I don't believe there is a way around it. I also think it would be the easiest after hearing all the other stuff suggested

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Programming Help	TiSwAs	Meridian Systems	15	09-01-2006 02:51 AM
can't free up DN	dylan_leggatt	Meridian Systems	5	06-16-2006 10:51 AM
Nortel Meridian Option 11	rlarin	Meridian Systems	11	05-16-2006 04:45 PM
Set to set messaging	justzikle	Meridian Systems	1	03-27-2006 07:18 AM
CICS 7.0 Male voice only, static on T7316	grover	BCM and Norstar	2	03-21-2006 01:55 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)