Creating a Phantom TN Loop - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

mmtech · 12-06-2002, 03:40 PM

I have tried to create a loop for Phantom TN's in load 17 and load 97, I have a Option 11C, I have tried the procedure in the Features and Services NTP and in the IO guide, but I am not getting the desired result. This on release 25.30. What am I missing?

acewarlock · 12-06-2002, 03:54 PM

This is taken from a post by Gei in the Nortel Fourm.

Per Gei

Phantom loops on an OPT 11 are 64-80. This is from the NTPs
N0-N156 - OPT 51-81
N64-N80 - OPT 11

Local Superloop in multiples of four; for Option 11C
systems, range is 64-80 in multiples of four; precede loop
number with “N” to create a phantom loop; precede with an
“X” to remove a terminal loop.
Note: Phantom TNs can use loops 0-159 for all machine types
except the Option 11C. Phantom TNs on Option 11C telephones
are restricted to card slots 41-60 (which convert to superloops
64-80).

PS: if you need more help post to the Nortel Forum Not (ACD)

[Edited on 6/12/2002 by acewarlock]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ncr calculation ?	shankar	Meridian Systems	7	07-12-2006 12:57 AM
Phantom Loop Creation Problem	KLocke	Meridian Systems	7	07-24-2005 09:57 AM
phantom loop	justzikle	Meridian Systems	3	03-02-2005 01:06 PM
Creating a Phantom Loop	HCJes	Meridian Systems	3	03-22-2004 11:20 PM
Adding a Phantom Loop	PBXrookie	Meridian Systems	1	11-27-2002 03:46 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)