NCOS and TGAR - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

kirwin · 12-06-2002, 02:24 PM

Where can I print out the configured settings for NCOS and TGAR. I need to change some settings to allow and deny access to certain features. Thanks in advance for any advice.

Ken

acewarlock · 12-06-2002, 02:38 PM

NCOS effects NARS and BARS goto LD 87 and prt NCTL.

TGAR and TARG only come into effect if you use access code dialing. there is no one load to get this info. you would need to goto LD 21 and prt TNB to see each TN's TGAR and then in LD 21 prt all RDB to see what each route's TARG is set to. when ever a TARG and a TGAR match when dialing an access code the call will be denied.

R-Man · 12-06-2002, 03:28 PM

What features do you want to deny ?

kirwin · 12-06-2002, 04:12 PM

I need to restrict access to a certain paging route from a certain department.

fonchick · 12-06-2002, 04:21 PM

Are they dialing the route access code of the paging route. If so, you do this with TGAR and TARG.

***gei_spot*** · 12-06-2002, 04:22 PM

then you will need to make TARG and TGAR match on all the phones you want to restrict access to. hope it's not a large dept or you are going to have some sore fingers :laugh:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Programming NCOS	radicalphoney	Meridian Systems	3	06-19-2005 10:40 PM
NARS and BARS	MrClean61	Meridian Systems	15	02-24-2004 08:52 PM
How to determine NCOS and TGAR	PBXrookie	Meridian Systems	9	11-20-2002 12:47 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)