Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > NORTEL > Meridian Systems
Reload this Page Outgoing calls
   SEARCH  
     
User Name Password      
Save ?
Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications


Free Call Accounting Quotes   PBX Programming Software  Nortel Software  Avaya Products  Cisco Call Accounting

Reply
 
LinkBack Thread Tools Display Modes
Old December 4th, 2008   #1 (permalink)
Senior Member

Activity Longevity
3/20 10/20
Today Posts
0/0 ssssss284
Rep Power: 0o_mostafa10 is a newbie
Gender:
Country:
Outgoing calls
hi all,
we are setting-up an opt11C system,at the first time we create a route 1 in RDB with only 1 analog trunck member and when we try to make outgoing calls, we have only a continous tone of the analog line , The call does not succeed.
when we make trace in LD80, we see the call detail below :

.TRAC 0 8000
ACTIVE TN 002 0 00 00
ORIG TN 002 0 00 00 KEY 0 SCR MARP CUST 0 DN 8000 TYPE 3902
TERM TN 001 0 00 01 COT RMBR 1 1 OUTGOING TRUNK CALL
DIAL DN 88061405289
MAIN_PM DIAL AUX_PM DDL
TALKSLOT ORIG 18 TERM 18
EES_DATA:
NONE
QUEU 128
CALL ID 0 94

AUX NARS

PLS HELP
RGDS
o_mostafa10 is offline   sendpm.gif Reply With Quote
Old December 4th, 2008   #2 (permalink)
Junior Member

Activity Longevity
1/20 13/20
Today Posts
0/0 sssssss46
Rep Power: 5krishnamurthys is on a distinguished road
can you share the route and trunk configuration details for the same.
krishnamurthys is offline   sendpm.gif Reply With Quote
Old December 5th, 2008   #3 (permalink)
Senior Member

Activity Longevity
3/20 10/20
Today Posts
0/0 ssssss284
Rep Power: 0o_mostafa10 is a newbie
Gender:
Country:
pls can you show me how to share the route and trunk configuration details for the same ?
o_mostafa10 is offline   sendpm.gif Reply With Quote
Old December 9th, 2008   #4 (permalink)
Junior Member

Activity Longevity
0/20 4/20
Today Posts
0/0 sssssss22
Rep Power: 0Eagle5 is a newbie
Country:
Looking at the trace, you did not send out a 1 before your number. Looks like
you dialed 8-806-140-5289. Your called terminated on TN 1 1. Is this correct, or should the leading 8 be a 1???
Eagle5 is offline   sendpm.gif Reply With Quote
Old December 10th, 2008   #5 (permalink)
Senior Member
 
Archibald J. Cox's Avatar
Archibald J. Cox has no status.

Activity Longevity
0/20 16/20
Today Posts
0/0 sssss1780
Location: Where the hell is Tiverton, Ontario (CANADA)?!?!
Rep Power: 7Archibald J. Cox will become famous soon enough
Gender:
Country:
Send a message via AIM to Archibald J. Cox
Make sure your analog trunk is set to CLS = DTN instead of DIP (Digitone instead of Dial Pulse) A lot of COs don't accept pulse dialing anymore.
Archibald J. Cox is offline   sendpm.gif Reply With Quote
Old December 13th, 2008   #6 (permalink)
Senior Member

Activity Longevity
3/20 10/20
Today Posts
0/0 ssssss284
Rep Power: 0o_mostafa10 is a newbie
Gender:
Country:
yes

Now is good I have check for all these parameters, and when we have enable TDS and DTR loops then we can make outgoings Calls

Thanks
o_mostafa10 is offline   sendpm.gif Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Outgoing calls go to switchboard 612moto Meridian Systems 2 May 7th, 2007 04:22 PM
Outgoing calls on PRI Fail rhack Inter-Tel 1 March 15th, 2006 01:23 AM
PLEASE HELP!! No outgoing calls katrina-evac Meridian Systems 3 September 15th, 2005 08:18 PM
ANI on Outgoing calls bon Meridian Systems 10 March 20th, 2005 09:35 PM
Outgoing Calls on 61c dmccue Meridian Systems 1 January 26th, 2005 12:28 PM


All times are GMT -4. The time now is 12:43 AM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...