Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > NORTEL > Meridian Systems
Reload this Page SIP trunks / outbound CLID
   SEARCH  
     
User Name Password      
Save ?
Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications


Free Call Accounting Quotes   PBX Programming Software  Nortel Software  Avaya Products  Cisco Call Accounting

Reply
 
LinkBack Thread Tools Display Modes
Old November 5th, 2008   #1 (permalink)
Junior Member

Activity Longevity
0/20 19/20
Today Posts
0/0 sssssss15
Rep Power: 7tigressa is on a distinguished road
SIP trunks / outbound CLID
We have a third-party call center server connected to a CS1K via SIP trunks. When the users make a call via the soft phone connected to the third-party call server the call goes to the CS1K via SIP trunks and then out through the PSTN. The caller-id shows the 4-digit extension of the soft phone (which is not a DID or even close and has nothing to do with the CS1K). The call hits the PSTN and some bogus LEC table entry takes over and the CLID that displays is completely incorrect. The thing is we need the DIDs to show up for all calls coming directly from the CS1K. It's just these calls from this call center server that we need to show the main number.

I'm looking for a way to set a CLID table entry on the SIP trunks that connect the call center server and CS1K so that any calls coming from this call center server via the sip trunks would send a CLID table entry of 0 (which is our main DID).

I am open to any suggestions. Thanks.
tigressa is offline   sendpm.gif Reply With Quote
Old November 5th, 2008   #2 (permalink)
Moderator
 
gei_spot's Avatar
gei_spot is going phishing

Activity Longevity
18/20 20/20
Today Posts
0/0 sssss5155
Location: Somewhere in this vast universe on a little rock that looks like a grape.
Rep Power: 13gei_spot will become famous soon enough
Gender:
Country:
How are you set up on you provisoning and DHCP servers ? And then you might need to talk to the LEC.
__________________
I'm a member of the "PbxInfo Band"
gei_spot is offline   sendpm.gif Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
BCM 400 3.7 PRI outbound CLID mountain!! BCM and Norstar 2 December 8th, 2006 03:43 PM
Outbound CLID Panchanka Meridian Systems 4 August 26th, 2005 04:22 PM
Outbound CLID "Name" PRI M1tech Meridian Systems 4 August 22nd, 2003 09:59 AM
CLID outbound. myetman Meridian Systems 6 April 18th, 2003 07:27 PM
Testing our outbound trunks roz Meridian Systems 11 December 17th, 2002 11:22 AM


All times are GMT -4. The time now is 03:33 AM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...