Meridian Option 11 - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

manchondo · 08-07-2008, 01:59 PM

I have the Option 11, and I have some problems to connect some calls because the PBX hang the call.

By example the user make the call, the PBX sends the digits to the central office of the carrier, the carrier interpret the call and if everything it is ok, the call back to the PBX but if the time goes up of 10 to 13 seconds the PBX automatically hang the call.

My question is, What is the way to increase the time in the PBX to wait the call from the CO of the carrier.

I am from Chihuahua Mexico and this problem starting to happen because the carriers from here change all the configurations to permit the portability of the phone numbers.

Thank you !!

jimmyt · 08-08-2008, 03:11 PM

Maybe take a look at your Timers in the RDB. Not sure but it might help.

***gei_spot*** · 08-08-2008, 04:22 PM

Check your FEDC/NEDC make sure they are set to ETH

jack · 08-08-2008, 06:04 PM

Check ith the carrier to see why they are dropping your calls.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meridian Option 61C Tie Trunk	DSN_Switch_Tech	Meridian Systems	4	01-13-2008 05:05 AM
Upgrading Meridian Option 51 C to......	vsmith1026	Meridian Systems	5	03-01-2007 11:32 AM
Nortel Meridian Option 11	rlarin	Meridian Systems	11	05-16-2006 04:45 PM
Option 11 Meridian Mail Card Option	Spanton	Meridian Systems	2	03-03-2006 04:11 PM
Meridian Option 11c error	cmudro	Meridian Systems	6	01-30-2006 12:24 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)