Remote Peripheral Equipment - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

ismael · 08-08-2003, 02:24 PM

Hello!

Somebody knows how to install a remote equipment, I install one in my company 5 years ago but I don't remember how.
Because 2 years ago I lost my memories (I lost all my books and notebooks in a fire, all my office go in the fire je je)

So I need to turn Up a new remote peripheral equipment, I have a 81C wit 2 Core/Network module and 2 Networks Modules, in the first 2 Core/Net the slots 0-7 are busy.
But in the Net modules I have free slots, so I put the the NT1P61 Fibre Superloop Network Card in the slot 7 and don't have problem with another NT8D04.
I want to define the NT1P61 with a new Superloop (SLP 24 ) But I don't remenber where I can do it.

Or in what Overlay I can see the another SLP of the another Remote, Equipment :casstet:

I'm lost

Thanks, Ismael

Steamer · 08-08-2003, 09:45 PM

Try LD 97
TYPE FIRP

You need to look at the Remote Services Guide in the MERL - Fiber Remote IPE.
Or you can find it online at http://clongman.dns2go.com/telecom/N...rtel_docs.html
If you don't already own the hardware for this then you really want to look into the newer version -
Fiber Remote Multi-IPE which uses a regular superloop with an external Fiber Remote Interface.

ismael · 08-11-2003, 01:20 PM

Thanks, but I try in LD 97 before.
I have one Remote in superloop 8, and have 178 extension there.
When I try to install another Remote first I chek in LD 97 for an FIRP but I don't have any.
So, I read all the manual and the only way is icreate a FIRP, so I'm confused.
I prt all the information of my superloop 8 (slot 7 in the core network gabimet 0 (remote equipment) and create another with a copy & paste in the slot 7 (core network gabimnet 1), I check for a superloop free and take the number 24 (the superloos are multip of 4, 4, 8, 12, 16, 20 ,24, etc)
I check for a free space btween the card NT1P61 & NT8D04 al least 1 slot away so I take 2 slots away in the left and in the rigth.
So I have the card Nt1P61 Enable but I can't enable the NT1P63 card (fibre optic card) I check the fiber Tx to RX & Rx to Tx and it's OK
I check the fiber optick with a fluke DSP-2000 and it's OK (using the patch cords)

So do you have another clue?

Thanks :casstet:

Steamer · 08-11-2003, 01:54 PM

Sorry Ismael - I'm not much help on this.
Not much experience on the old style fiber remote.
Steamer

iceman · 08-13-2003, 06:08 AM

Make sure you have done these first.

LD97
REQ CHG
TYPE FIRP
SUPL XXX
.
.
.

Still in 97

REQ CHG
SUPL XXX same as before
SLOT L OR R
SUPT FIBR
.
.
.
.

good luck

ismael · 08-14-2003, 01:42 PM

I try to create a FIRP in LD 97 but I can't because I don't have the software to create a FIRP.
But I have one remote with fiber, I check all and I think this is a Chicanada (when a Mexican use some tricks)
Because The SUPL 8 it's a STD loop not a CARR o FIRP and is working like a NT8D04, but I have the NT1P61 card with the NT1P63.
Do you know how I can do this trick?

thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing the number a set is forwarded to from off site.	pcutler	Meridian Systems	7	11-28-2007 11:56 AM
i2050	Spanton	Meridian Systems	1	08-13-2003 10:56 AM
Secure Modems	DarrenFlynn	Meridian Systems	3	08-13-2003 06:24 AM
Carrier Remote	monkeyboy	Meridian Systems	1	08-11-2003 02:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)