Problems switching from cpu 1 to 0 - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

Tonka56 · 07-07-2003, 09:21 AM

during the mid routine sometime cpu O will lock up the outgoing T-1, it does this once every 4 to 5 days....I remotely switch cpu's on ld 135 and they will come up with no problem at all, then it will work for 4 to 5 days....I have no error reading or faults on the history file....What could be the problem...Bad card on CPU 0 that drops the T-1? Need to know what card do I need to change to do some testing. Thanks

Rachelle · 07-07-2003, 11:06 AM

I know that periodically during the Mid's the Core will run additional diagnostics. If these are trying to run and they are experiencing corruption your system could experience this type of issue. I know that this will sound like a cop-out but, try a Sysload. This may clear your issue.

rlc

Moskvich · 07-07-2003, 07:15 PM

I had that problem before. There is a patch for this.

Tonka56 · 07-09-2003, 10:12 AM

guess I have to call nortel for this patch and its going to cost an arm and a leg...

Tonka56 · 07-23-2003, 12:12 PM

I have notice that it locks up every 5th day after ld 137 does the weekly....but no error reading on the history or any error code. Any sugestion, posbile bad CPU card or PS card :casstet:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems with IP 1120E phones	Alison	Meridian Systems	1	08-24-2006 11:37 PM
BCM50 problems	frozenarrow	BCM and Norstar	5	08-16-2006 11:24 AM
A Hackers Guide to the SL-1	rixride	Meridian Systems	2	08-15-2006 07:09 AM
Controller, Card or CPU issue	WhereWolf	Meridian Systems	3	06-06-2006 05:13 PM
X-Box 360 problems...	JulianW	Off Topic - Humor/Jokes	1	11-24-2005 10:53 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)