mmtech

I would Recommend that you CRT from Vandyke.com it has RLogin which you will need to use as telnet is not supported. with rlogin the hostname is the Ip address to your switch and the username is cpsid1100 ( I can't remember if it is lower or upper case).
YOu need setup a PTY port in load 17 also

morpheus

Thanks, I'll give that a try.

morpheus

I've downloaded a trial version of CRT and I got in; however, it's asking me for the PDT password. I'm not sure what it is. I have the other password that I always use to get in via the com3 connection I used to use.

Any help?

Thanks

mmtech

Yea I had that problem also first time I did it and has to do with entering the cpsid1100 right. I just checked my rlogin and it is CPSID1100 (in caps) which entered in the username field. And you have a PTY configured also?

morpheus

THANKS for the help. It works great. Is it possible to get into Meridian Mail also?

Thanks again.

mmtech

mmtech

Yes CRT has built vt400 emulation that you can choose when select custom terminal in the terminal emulation setup. A bit a caution I tried using rolgin to get into voicemail and it hosed the voicemail and the swicth ( is caused VAS ID error that macthed what the voicemail VAS ID was) as soon as I typed in AX. HAD TO INI THE SWITCH, which is a bummer when I live 2500 miles away from that switch. I had to get the IT manager in that office to go back from home and push INI button.
Anyway I use it with a EC cabinet with serial connection and works great, it will put the keys in the same place as sitting at the dumb terminal. No having to screw with keymap in procomm