ismael

This is the Prt LD 17 CEQU

REQ PRT
TYPE CEQU

CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
048
DDCS
DTCS
XCT 000
CONF 029 030 031

DLOP NUM DCH FRM LCMT YALM TRSH
PRI 001 24 ESF B8S DG2 00
APVL
DTI2
MISP
MTYP 640K

pbxn

You have this loop as one of your clocking sources in ld 60 ssck to see the status.

PP

revise it in ld 73

ismael

I don't have the Card in the PBX (the T1), in fact I want to use this PBX for a new Office with 30 extensions and a new card PRI2 (E1) to my 81C.
So I delete the database of extensions, routes bla bla bla.... And I create a new customer database, new extensions, trunks CDP...... but I can't delete de PRI (T1)

In Ld 60 I can view the status of the loop 1 (PRI) and the SSCK 0
But where I can delete the clock reference to delete the PRI (T1) in LD 17?
>LD 60
.STAT
PRI* TRK LOOP 1 - DSBL
FFMT/LCMT/YALMT: ESF/B8Z/DG2
.SSCK 0
DSBL
.ENL CC 0

DTI068 (CLOCK NOT RESPONDING)
.

ismael

In LD 73 I have the error:

REQ CHG
TYPE DDB
SCH 2030 (Digital data block does not exist)
REQ

ismael

Also in LD 73 I try:

REQ PRT
TYPE PRI
FEAT LPTI
SCH€0111 (Invalid response)
FEAT ABCD
SCH€0111 (Invalid response)
FEAT SYTI
SCH€0111 (Invalid response)
FEAT PAD
PDCA
TNLS YES

hmursal152

pls try:
REQ: PRT
TYPE: PRI2
FEAT: SYTI

or MOD the loop of your clock. Now it is in loop 1 and change it CCK0 = 2.

wern32

I had a similar problem...Someone remove an old tmdi without outing it

Ld 96
dis dch "x"
ld 60
disl "X"
dis cc 0
ld 96
dis tmdi "X" (slot)

this solved my problem

pbxn

You may need to also check that whatever working cards you have in the switch have the clock controller add on. If not, you will have to frog the outed card with one of your existing working cards. Then you can go into ld 73 and add your clocking source. Ex. Next TMDI card = slot 3. ld 73, new, ddb, 3....