| |||||||||
 |
| ||||||||
| |||||||||||||||
| |||||||||||||||
| Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications |
| Tags: change, consequence, feature, question |
 |
| | LinkBack | Thread Tools | Display Modes |
 06-05-2003, 12:51 PM | #1 (permalink) | ||||||||
| Senior Member   Rachelle is curious
Location: Lou, KY Rep Power: 9  Country:  | Mics XC 5.0 Issue! What capabilities will the user lose if I change the EXTT prompt to NO in the Customer Datablock? What capability will be blocked if all trunks are set to NCOS 0? rachelle __________________ No matter where you go, there is the Ladies Love Marty Fan Club. :bow2: :bow2: :bow2: | ||||||||
 |   |
| 06-05-2003, 10:31 PM | #2 (permalink) | ||||||||
| Senior Member  PP is AN OLD ROLMEN WORKING ON NORTEL AND AVAYA
Location: MIAMI, FLA Rep Power: 7 | DID's JUST LIKE IT READS, IT WILL PREVENT THE CONNECTION OF SUPERVISED TRUNKS BY EITHER CONF OR TRANFER AS IN DIALING 9. AND AS FAR AS CHANGING THE NCOS OF YOUR TRUNKS TO 0 I WOULD DO SOME RESEARCH FIRST, NORMALLY THIS IS DONE TO BE ABLE TO DO A FORWARD TO A TRUNK GROUP | ||||||||
| | |
| 06-06-2003, 12:00 PM | #3 (permalink) | ||||||||
| Senior Member Rachelle is curious
Location: Lou, KY Rep Power: 9 Country: | Changing route when LD carrier fails??? The EXTT feature I still don't really understand. What can a caller do now with it set to YES that they wouldn't be able to do with it set to NO? Can you give me a forinstance? rachelle __________________ No matter where you go, there is the Ladies Love Marty Fan Club. :bow2: :bow2: :bow2: | ||||||||
| | |
| 06-06-2003, 02:40 PM | #4 (permalink) | ||||||||
| Senior Member PP is AN OLD ROLMEN WORKING ON NORTEL AND AVAYA
Location: MIAMI, FLA Rep Power: 7 | line in use (ghost caller) It's my understanding that it has to do with networking systems and the capibility of transfer across the trunks. All my switches are set to NO | ||||||||
| | |
| 06-06-2003, 03:51 PM | #5 (permalink) | ||||||||
| Senior Member Rachelle is curious
Location: Lou, KY Rep Power: 9 Country: | Merlin/Hold So, if say a call comes in to the PBX and hits a DSC to an IVR. Then from the IVR the call is bridged to another T1 and is sent back to the PBX and then out of the system to the Public network would EXTT need to be set to YES to facilitate this type of call flow? rlc __________________ No matter where you go, there is the Ladies Love Marty Fan Club. :bow2: :bow2: :bow2: | ||||||||
| | |
| 06-09-2003, 07:42 AM | #7 (permalink) | ||||||||
| Senior Member Rachelle is curious
Location: Lou, KY Rep Power: 9 Country: | Hot Air Performing a security audit and EXTT is recommended to be set at NO. That is why I am asking for a real world explaination of the consequences of changing this setting. rlc __________________ No matter where you go, there is the Ladies Love Marty Fan Club. :bow2: :bow2: :bow2: | ||||||||
| | |
| 06-11-2003, 08:42 AM | #9 (permalink) | ||||||||
| Junior Member
Location: Curitiba - PR - Brasil Rep Power: 6 | op:11c networking with norstar Rachelee, if you turn the EXTT to NO, may be youŽll canŽt dial a external call, press transfer, make a second external call and complete the tranfer. Another interference on system is make conference call for external calls, like transfer. Depends of other parameters... | ||||||||
| | |
| 06-11-2003, 10:48 AM | #10 (permalink) | ||||||||
| Senior Member Rachelle is curious
Location: Lou, KY Rep Power: 9 Country: | 4 asteriks Those parameters were changed and it appears that all normal call processing in flowing as it should. It has been changed for the last 4 hours of operation and no one has had any difficulties. I will assume that these settings were allowed for a projected networking of sites that never took place. All seems to be well at this time. rlc __________________ No matter where you go, there is the Ladies Love Marty Fan Club. :bow2: :bow2: :bow2: | ||||||||
| | |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
 Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lightbulbs | SD_WILSON | Off Topic - Humor/Jokes | 6 | 05-03-2006 10:53 AM |
| CICS 7.0 Male voice only, static on T7316 | grover | BCM and Norstar | 2 | 03-21-2006 12:55 AM |
| Transfer call from Analog extension? | sk_carter | Meridian Systems | 4 | 09-29-2004 01:09 PM |
| Spre Codes | wblucas | Meridian Systems | 3 | 09-08-2004 02:15 PM |
| FFC's not working | switch | Meridian Systems | 4 | 04-17-2003 07:51 AM |
Linear Mode
