mjamm1

I do not use Teraterm, but here is what a Rlogin connection to the PBX looks like.

rlogin -l CPSID XX.XX.X.XXX

You should be able to setup a connection profile and see a drop down for telnet, direct connect, rlogin, ect... Select Rlogin and then use the CPSID for the Username.

You need to have you PBX connected to the LAN for this to work. Let us know if you have any issues and I can download Teraterm and help you out.

shankar

U can use procomm!!! for rlogin....

http://www.tek-tips.com/viewthread.c...1256296&page=1

lipowolf

Hello,

All the pbx's are connected to the lan and I can ping them.

But I do not see how to do the rlogin

I have traid with telnet port 513, with ssh ssh2 but nothing is working, so it would be fine if you could help me.

Kind regards;

mjamm1

I downloaded teraterm and did not see the Rlogin protocol for it, just telnet. You would need to connect to your signaling server to use telnet or use a telnet server such as UWIN for it.

You could download PuTTY terminal emulator and use it free of charge.