Rachelle

Hunt groups are hard coded at the set level. For example, say you have three phones that hunt in a cirle to one another. They would all have the HNT prompt filled at like so:

ext 1111 HNT 2222, ext 2222 HNT 3333, ext 3333 HNT 1111

So, you would enter each set and program these HNT prompts. There is a way to print HNT patterns in LD 82 (REQ= HNT, Dn= specific DN of one of your sets).



rlc

__________________
No matter where you go, there is the Ladies Love Marty Fan Club.

amigo1

Thank you

Rachelle

colin

we do them differently here in the UK

To create Hunt Groups you need to use LD18 to store the extensions in the Group Hunt List and LD57, which assigns the Pilot DN to the Group Hunt List.

LD 18
REQ NEW
TYPE GHT
CUST 0
LSNO (Next List Number)
DNSZ (Directory Number Size)
SIZE (Size of list, How many entries)
STOR 00 XXXX (XXXX = Directory Number)
WRT (C/R)
STOR 01 XXXX (XXXX = Directory Number)


Continue with store entries until list completed.

Attaching a Pilot DN (PLDN) to the list number LD 57

REQ CHG
TYPE FFC
CUST 0
CODE PLDN
PLDN (Pilot Directory Number, which must be a unique number on the Meridian)
USE GPHT (Group Hunting)
LSNO List number created in LD18
HTYP (RRB=Round Robin, LIN = Linear
CFWI (NO = Skip Extn if CFW Activated
YES = Terminate on Extn if CFW Activated)
MQUE (ALL = No limit on queued Calls
0 = No calls to be queued
1 = Maximum of 1 call queued)

In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.

The changes are made in LD 18.

REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.
To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt

Wilson Chan

In Notel terms:
Rachelle's format is call circuler hunt; and
Colin's format is hunt Group.
Both ways are right, depends on what you want to do. Only different is when use the hunt group; If you want to remove one fo the member, you must to take it out from GHT list first.