| |||||||||
 |
| ||||||||
| |||||||||||||||
| |||||||||||||||
| Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications |
| Tags: dial, dialing, modems |
 |
| | LinkBack | Thread Tools | Display Modes |
 08-15-2006, 10:30 AM | #1 (permalink) | ||||||||
| Junior Member 
Location: Alpharetta, GA Rep Power: 5  Gender:  Country:  |  Need way to make modems dial w/o dialing 9 Is there a way to program a set of modems (analog ports) so they don't have to dial a 9 to access the outside? We are upgrading our IrisNGen server with DIVA cards which means the circuits that go straight to the server wont need a 9 to dial out. The phone numbers will just be 10 or 11 digits. We use a specialized application to dial remotely into PBX's through our desktop that access USR modems attached to our PC's. This application polls the SQL database for the phone number and sends it to the local modem to dialout to troubleshoot alarms. Since these modems are hooked up to the PBX on analog ports, they require the use of a 9 to dialout. There are apporx 25 analog ports that I need to configure so you don't have to dial a 9. The switch assumes you want an outside line. Is it a COS thing? Need a little programming help to get this working. Running 25.40b on an Optioon 61C. | ||||||||
 |   |
| 08-15-2006, 11:01 AM | #2 (permalink) | ||||||||
| Senior Member  slagburn has no status.
Location: 3498.51 miles from Tiverton, Ontario (CANADA) Rep Power: 16 Gender:  Country:  | Pretranslation tables... basically a speed call list as a XLST that inserts the AC in front of every dialed number. Last edited by slagburn; 08-15-2006 at 07:50 PM. | ||||||||
| | |
| 08-15-2006, 11:41 AM | #3 (permalink) | ||||||||
| Junior Member
Location: Alpharetta, GA Rep Power: 5 Gender: Country: | OK, let me see if this would be correct. Build a speed call list with the digit 9. Setup a Pretranslation group to access that speed call list. Add the XLST # to the set. If I send 1-555-555-1212 from that set it dials 9,1-555-555-1212? Would that be the correct procedure for programming? | ||||||||
| | |
| 08-15-2006, 11:55 AM | #4 (permalink) | |||||||||
| Senior Member slagburn has no status.
Location: 3498.51 miles from Tiverton, Ontario (CANADA) Rep Power: 16 Gender: Country: | Yeah pretty much. If you don't have pretranslations set I think you need to adust a few prompts in either the CDB or the Config1... I forget but it will SCH you with the info if you don't have it configured. Once configured it will add the XLST prompt to every station so if you have TMS that looks at station database it might need to be updated. This isn't a insert 9 xlst... but it could be. (Don't ask what it's there for) Quote:
| |||||||||
| | |
| 08-15-2006, 02:12 PM | #5 (permalink) | |||||||||
| Junior Member
Location: Alpharetta, GA Rep Power: 5 Gender: Country: | This is what I programmed. I turned it on in LD15. I added XLST 1 to the analog set and tried to dial a number and it does not add the 9 before it dials. What did I do wrong? Quote:
| |||||||||
| | |
| 08-15-2006, 02:46 PM | #6 (permalink) | ||||||||
| Senior Member slagburn has no status.
Location: 3498.51 miles from Tiverton, Ontario (CANADA) Rep Power: 16 Gender: Country: | Like this... DNSZ 12 STOR 0 STOR 1 91 STOR 2 92 STOR 3 93 STOR 4 94 STOR 5 95 STOR 6 96 STOR 7 97 STOR 8 98 STOR 9 99 If the system sees a number leading with 4 it will absorb the 4 in the SCL and insert 94 in front of the remaining digits, etc, etc, etc. I think... | ||||||||
| | |
| 01-07-2007, 07:40 PM | #10 (permalink) | ||||||||
| Junior Member
Rep Power: 0 Country: | I was viewing these posts old & new .. & just saw this as dialing without 9 or access code .. & I guess that's the exact soloution .. but what if the user wants to call internal call ?? he has no other alternative except to dial out & the excluded digits !! any way ..VZTech .. you made an effort .. helped that guy .. good luck .. & keep goin ... | ||||||||
| | |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
 Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 10XX calls will not go through | 612moto | Meridian Systems | 74 | 08-08-2006 10:48 AM |
| I2050 doesn't make a sound except for ring and dial tone? | Lovell | Meridian Systems | 5 | 01-06-2005 02:23 PM |
| Calling Line ID | markj39k | Meridian Systems | 3 | 06-12-2003 06:12 AM |
| Make key unable to dial out? | absinthium | Meridian Systems | 3 | 05-15-2003 07:13 PM |
Linear Mode
