| |||||||||
![]() | | ||||||||
| |||||||||||||||
| |||||||||||||||
| Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications |
| Tags: call, number, specific, unable |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 (permalink) | ||||||||
| Junior Member ![]()
Rep Power: 5 ![]() | Unable to call specific number. Trace information is shown below. Using the same set and dialing both numbers the same way, the first call does not complete but the second one does even though both are within same area code. And both NXX's are programmed to use the same RLI. What is happening and how do I correct it? .TRAC 0 8899 ACTIVE TN 018 0 00 06 ORIG 018 0 00 06 0 SCR MARP 0 8899 2616 TERM 004 24 DID RMBR 9 24 TDTN 0 SLOT 9 PTY SLOT 25 DIAL DN xyz9546888 MAIN_PM DIAL AUX_PM NOOUTPULSE TALKSLOT ORIG 25 TERM 25 EES_DATA: NONE QUEU NONE CALL ID 0 478 AUX NARS .TRAC 0 8899 ACTIVE TN 018 0 00 06 ORIG 018 0 00 06 0 SCR MARP 0 8899 2616 TERM 004 24 DID RMBR 9 24 DIAL DN 91xyz2706063 MAIN_PM ESTD TALKSLOT ORIG 15 TERM 15 EES_DATA: NONE QUEU NONE CALL ID 0 445 | ||||||||
| | |
| | #2 (permalink) | ||||||||
| Moderator ![]() John_In_Dakota is in need of a long nap.
Location: 1069.7 miles from Tiverton, Ontario (CANADA) Rep Power: 13 ![]() | This is the first number you dialed: DIAL DN xyz9546888 ( I see this as 9-1?95-468-88 ) And this is the second: DIAL DN 91xyz2706063 ( I see this as 9-1???-270-6063 ) It looks to me that your missing some digits on the first number. __________________ Thankful for everything...at least today. | ||||||||
| | |
| | #3 (permalink) | ||||||||
| Junior Member ![]()
Rep Power: 5 ![]() | John, thanks for the reply, I appreciate it. I agree that it does appear that there are digits missing from the first number that was dialed but both numbers were dialed correctly and in the exact same way: "9-1-area code-number". For some reason, the PBX appears to be stripping the "9-1" digits from the first call or, at least, is only "seeing" and processing what is shown. I have tried this using multiple sets with the same results. | ||||||||
| | |
| | #5 (permalink) | ||||||||
| Moderator ![]() John_In_Dakota is in need of a long nap.
Location: 1069.7 miles from Tiverton, Ontario (CANADA) Rep Power: 13 ![]() | Print out the Npa/Nxx of both calls in LD 90 and see what RLI you are sending the call to. __________________ Thankful for everything...at least today. | ||||||||
| | |
| | #6 (permalink) | ||||||||
| Junior Member ![]()
Rep Power: 5 ![]() | Mem Avail: (u/p): 1067100 Used U P: 249107 60048 Tot: 1376255 Disk Recs Avail: 419 Req Prt Cust 0 Feat Net Tran Ac1 Type Npa Npa 1804 Npa 1804 Rli 1 Deny 976 Sdrr Deny Codes = 1 Itei None Mem Avail: (u/p): 1067100 Used U P: 249107 60048 Tot: 1376255 Disk Recs Avail: 419 Req Prt Cust 0 Feat Net Tran Ac1 Type Nxx Nxx 954 Nxx 954 Rli 3 Sdrr None Itei None Mem Avail: (u/p): 1067100 Used U P: 249107 60048 Tot: 1376255 Disk Recs Avail: 419 Req Prt Cust 0 Feat Net Tran Ac1 Type Nxx Nxx 270 Nxx 270 Rli 3 Sdrr None Itei None | ||||||||
| | |
| | #9 (permalink) | ||||||||
| Junior Member ![]()
Rep Power: 5 ![]() | Rli 1 Entr 0 Lter No Rout 9 Tod 0 On 1 On 2 On 3 On 4 On 5 On 6 On 7 On Cnv No Exp No Frl 0 Dmi 1 Fci 0 Fsni 0 Sboc Nrr Cbq No Entr 1 Lter No Rout 66 Tod 0 On 1 On 2 On 3 On 4 On 5 On 6 On 7 On Cnv No Exp No Frl 0 Dmi 0 Fci 0 Fsni 0 Sboc Nrr Cbq No Iset 2 Nalt 5 Mfrl 5 Rli 3 Entr 0 Lter No Rout 66 Tod 0 On 1 On 2 On 3 On 4 On 5 On 6 On 7 On Cnv No Exp No Frl 2 Dmi 0 Fci 0 Fsni 0 Sboc Nrr Cbq No Iset 0 Nalt 5 Mfrl 1 | ||||||||
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Changing the number a set is forwarded to from off site. | pcutler | Meridian Systems | 7 | 11-28-2007 11:56 AM |
| SPRE Need? | justzikle | Meridian Systems | 7 | 11-22-2004 11:21 AM |
| Transfer call from Analog extension? | sk_carter | Meridian Systems | 4 | 09-29-2004 02:09 PM |
| Spre Codes | wblucas | Meridian Systems | 3 | 09-08-2004 03:15 PM |
| FFC's not working | switch | Meridian Systems | 4 | 04-17-2003 08:51 AM |