slagburn

Step 1... do an SLT in LD22 and make sure you have enough SIP access ports to program the number of SIP trunks you need.

SergSH

NTP will help you. "IP Peer Networking Installation and Configuration" (NTP 553-3001-213) - it's a good place to start.

mai_roo_jak

If you find in avaya web site , it will mention about how to configure both Nortel and Avaya PBX in the PDF document. Download it and try to follow the step from the PDF.

Fletch

This is a pretty broad question. SIP Trunks are configured as Virtual Trunks, pointing to the Signaling Server. This also then requires a Network Redirect Server to be configured on one of the Signaling Servers in the network, and then an NRS dialplan to be built pointing to registered Gateway Endpoints.

What may seem like a simple question is going to require a bit of research depending on what you have and have not implemented so far. If you canbe more specific with your question, then more specific help can be provided.

If you find yourself saying "What the heck is all that stuff he's talking about" then I strongly suggest you seek someone to assist you locally the first time through. This is not hard to implement, it just takes a bit of planning in the beginning, or you will quickly find yourself painted into a corner that will take a considerable effort to un-engineer. Once you have your feet wet a bit, youcan bang out a complete configuration from start to finish in no time at all.

__________________
Fletch
Nortel Emergency Services PLM

For more on Nortel E911 Solutions on the web:
http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcasts

Elisliche

Hi bablok i vee

tulaCulty

1
2