| |||||||||
 |
| ||||||||
| |||||||||||||||
| |||||||||||||||
| Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications |
| Tags: card, controller, cpu, issue |
 |
| | LinkBack | Thread Tools | Display Modes |
 06-06-2006, 09:18 AM | #1 (permalink) | ||||||||
| Senior Member   WhereWolf is sober (maybe....)
Rep Power: 4  Gender:  Country:  |  Controller, Card or CPU issue Option 61C Rel 3.0 This started yesterday - all day long I've been getting: XMI001 4 1 2 XMLC XMI002 4 1 2 XMLC when I test the controller, loop, and card, it checks out OK I noticed that this is when CPU 0 is active. --- After switchover & running on CPU 1 it seems to go away BUT: Running on CPU 1 I get this: XMI000 20 : Msg from shelf 0: XPEC error #0001 XMI000 20 : Msg from shelf 0: XPEC error #0001 XMI000 20 : Msg from shelf 0: XPEC error #0001 but no longer get the XMI001/2 4 1 2 errors Can someone help point me in the right direction? is it CPU related? some sort of intershelf controller? the SUPL controllers? Just freaky random crap?  Thanks! Wherewolf | ||||||||
 |   |
| 06-06-2006, 02:29 PM | #2 (permalink) | ||||||||
| Junior Member
Rep Power: 3 | Sounds like you might have some interference between the Controller and Superloop 4 that caused corruption in the firmware on the cards. Do you have 2 shelfs connected to one superloop? If the errors continue, try disabling the controllers and then the superloop. Then power off the IPE shelves. Then toggle off the superloop and unplug it. Reinstall the Superloop card and enable it. It will do a fresh download. Power on the IPE shelves and enable the controllers. The fresh download should stop the errors. | ||||||||
| | |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
 Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Option 11C PCMCIA card not working | gogoGophers | Meridian Systems | 8 | 02-04-2005 11:45 AM |
| Replace analog line card | thephoneguy | Meridian Systems | 2 | 08-04-2003 11:42 AM |
| Opt 11 slot map | freddog | Meridian Systems | 5 | 06-27-2003 11:00 PM |
Linear Mode
