| |||||||||
 |
| ||||||||
| |||||||||||||||
| |||||||||||||||
| Meridian Systems Welcome to the Nortel Meridian Forums Including Meridian Options 11-81C CS1000M Meridian Mail Call Pilot Companion and Sucession Hospitality OTM MAT MICB RAN NetGateway ..., and all other Applications |
| Tags: dch, disabled, invalid, ring, skid |
  |
| | LinkBack | Thread Tools | Display Modes |
 05-03-2006, 02:01 PM | #1 (permalink) |
| Senior Member  |  Dch: 26 Disabled Ring (invalid Skid) I was configuring a new PRI (61C suc 3.0), created the dch (IFC NI2 & RCAP NDS) added the trunks and enabled the loop. The DCH never establishes but spits out the message DCH: 26 DISABLED RING (INVALID SKID) over and over and over and over...... I've disabled the MSDL card and re-enabled, outed & rebuilt the dch....same thing... I've got different PRI and Dch in this configuration working, however the DCH is on a daughterboard. The DCH I'm fighting with now is on a NT6D80AB Ver 1 card....is this the problem? When I stat the card it shows the NI2 data loaded, but it's not happy when I try to estab the dch. Any Advice? Many Thanks Wherewolf |
 |   |
| 05-03-2006, 11:49 PM | #2 (permalink) |
| Senior Member  | Disable all of the DCH's on the MSDL card Disable the Loops of those DCH's Disable the MSDL Card itself Enable the MSDL Card with the FDL Option (ENL MSDL x FDL) Watch the output of the ENL command carefully and make sure that NO ERRORS are output. Enable the Loops Enable the DCH if they don't come up by themselves |
 | |
| 05-04-2006, 09:36 AM | #3 (permalink) |
| Senior Member | Thanks for the response Fletch. I tried as you suggested, there were no errors spit out, but the same results. I had a spare DCH daughterboard, so I yanked the old cables off, configured the Dual PRI for an onboard DCH and Viola!  it works like a charm.....must be the vintage of the MSDL card that can't handle NI2 ? I'm guessing here.....Wherewolf |
| | |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
