Strange Problem with a T1 isdn with SBC - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

yuvami · 04-28-2006, 11:20 AM

Hi, I have a strange porblem with a T1 PRI programmend like ESF,B8S.
Ihave 2 option 11C A and B connected with muxes only with DTI cards, one of the PBX A is in at different city and is connected to SBC lines with a T1 PRI, all the call get well to that PBX A and some DID are sent to the PBX B and all work fine, but some one detected when I received a call from a specific local Central Office, the call can not be send to the PBX B but if a ended the DID to a local extension of th PBX A the call get in a the set ring fine. I detected whe this happend a received a berarer cap of 3.1 khz.
Someone know something about this problem?

Buckshot · 04-28-2006, 02:55 PM

Did this work properly at 1 time, recently acting up? You might want to see if there are any differences in how the routes are programmed on PBX A and PBX B. Check your DSEL in the route for either 3DTA or 3VCE .. might want to make sure it is 3VCE (or whatever the working one is). Its possible your issue is in the route programming. Post your RDB in error.

yuvami · 04-29-2006, 01:51 PM

Thank you very much!!, it works!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Really Strange MICS/AA/Voice Mail problem	lgherb	BCM and Norstar	5	04-06-2006 08:30 AM
strange mer mail problem	Catalytic_Avatar	Meridian Systems	6	11-16-2004 06:45 PM
PRI and 6.1 Software - Strange Problem	Dynamic	BCM and Norstar	7	09-09-2004 09:17 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)