CLASS sets and Keycodes - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

WhereWolf · 03-15-2006, 03:55 PM

Can anyone answer as to CLASS sets needing keycodes? The NTP's talk to no limits placed by the addition of the CLASS feature, but that each TN configured as a CLASS unit counting toward the TN limits for the switch. I have installed the required XCMC Card, configured the CMOD's in LD13, and have the required pkg 95,332, and 333. Option 61C Sucsn 3. When I apply the CLS CNUA and CNAA, it responds with

SCH1885 - The number of CLASS Telephone TNs in the system exceeds the maximum number allowed.

Thanks for all the Help

Steamer · 03-15-2006, 07:09 PM

CLASS TN's are definitely distinct from regular analog TN's as far as the keycodes are concerned even though you are using the same line card.
You can get some of your analog TNs converted to CLASS but it will probably cost you a conversion fee.
Also you will have to initialize the switch for the keycode change to take affect since you will be decreasing the analog TNs.

WhereWolf · 03-15-2006, 11:01 PM

Thanks for the advice....I appreciate it very much. I find it strange that the 11c I have (same software release - upgraded at the same time) shows the same number of CLASS TN's as the Analog TN's. BUT I don't need the CLASS TN's on the 11C - I need them on the 61C. It's just curious that the same SUC upgrade produced different results. Hope this doesn't nickle & dime

me to death.......it's such a minor issue...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)