imported_colin

A listed directory number LDN will need to be added to the console.

First you will need to print out the ICI information for the console.


LD 21
REQ PRT
TYPE ATT
ATT_DATA
CUST 0


A list of ICI keys will be seen. You will need to check if one or more of the indicators as LD0 or LD1 etc against them.

From this you will be able to work out which is the next available LDN and also if there is a spare ICI key position.

Then using overlay
LD 15
REQ CHG
TYPE LDN
LDN_DATA
CUST 0
OPT (Return)
DLDN Yes
LDN0 (Return until it prompts the Spare LDN say for example LDN1)
LDN1 Required Number (it must be a unique number)
LDA1 Attendant consoles associated with LDN1 Enter either ALL or specific console numbers
Return until ICI reached (say ICI Key 2 is spare) and enter the new LDN as shown.
ICI 02 LD1
Return until REQ is shown.
Calls to the number quoted will now display on it's own key on the console.

justzikle

Thanx colin i understand that but what about defining in locations (LD 90)
what LDN refers while defining in LD 90

imported_colin

ok... any other numbers belonging to you as a main number to another site

LDN xx...xx Listed Directory Number
Up to 10 digit listed directory number, including NPA.

justzikle

Colin i got a PABX with locations setup(ld 90), on each location LDN=2000 is defined(five locations are defined, pbx is tied with PRI) what does that means??? can i dial 2000 exts, i mean is it a range???