imported_colin

example of LDNsetup



Departmental Listed Directory Number
The Departmental Listed Directory Number (DLDN) feature allows specified telephones sharing
the same numbering plan to belong to one group out of a possible six groups within a
Meridian 1 customer. Each Departmental Listed Directory Number (DLDN) group is identified
by one of the customer’s Listed Directory Numbers (LDNs). Calls to specific Listed
Directory Numbers (LDN), or dial-0 calls from extensions within a particular group of
telephones, are directed to the Attendant Console or consoles assigned to that LDN.
If there is more than 1 Attendant console assigned a particular DLDN, calls are presented
to each console via a "round Robin" list, it is presented to the next console in the
list after the one that was last allocated a call.

Feature implementation

LD 15
Enable the Departmental Listed Directory Number feature for a customer.

REQ CHG Change
TYPE CDB
LDN Customer Data Block
Release 21 gate opener
CUST 0-99 Customer number.
OPT NLDN;
(XLDN) Network wide LDN allowed.
Network wide LDN denied (default).
DLDN NO)/YES (Disable) enable DLDN.
LDN0 xxxx Listed Directory Number Zero.
LDA0 1 - 63 ALL Attendant Consoles associated with LDN 0. With X11the maximum number
of Attendant Consoles allowed is 63.
LDN1 xxxx Listed Directory Number One.
LDA1 1 - 63 All Attendant Console number associated with LDN 1.
LDN2 xxxx Listed Directory Number Two.
LDA2 1 - 63 All Attendant Console number associated with LDN 2.
LDN3 xxxx Listed Directory Number Three.
LDA3 1 - 63 All Attendant Console number associated with LDN 3.
LDN4 xxxx Listed Directory Number Four
LDA4 1 - 63 All Attendant Console number associated with LDN 4.
LDN5 xxxx Listed Directory Number Five.
LDA5 1 – 63 All Attendant Console number associated with LDN 5.
ICI xx LD0
xx LD1
xx LD2
xx LD4
xx LD5 Incoming Call Indication for Listed Directory Numbers xx LD3 Zero to Five (xx = key
number 00-19).


Note: To remove an LDN, enter an X before the Directory Number. An LDN cannot be removed
if any Attendant Consoles are associated with it. To remove an associated Attendant
Console, enter an X at the LDA prompt before the attendant number.

Woodro

If you dial a console with a 0 from a digital set or the console dials your ext. number.I noticed the display says 0-1, the users are telling me it use to say 8550, which is the LDN 0 entry. Any idea's as to why the displays are now reading 0-1 instead of the LDN 0 number?