P_I_R_A_T

Hi.

I’ve met the problem with the firmware upgrade of VMGC. The problem is:
During upgrade, after step when I have to write, the path where a new firmware located and level 1 password. The card printout that login failed.
-> upgradeXa "127.0.0.1","admin1","0000","/A:","SMCFW68.BIN"
value = 0 = 0x0
-> Connecting to 127.0.0.1...
Login failed.
Unknown errno = 0x212.


My second step was to try to made upgrade, via “jkl”. The card was rebooted, and then I pressed jkl, there I entered same command, mentioned above and only what I changed it was the password I used the default VMGC password. But it failed again.

upgradeXa "127.0.0.1","itgadmin","itgadmin","/A:/","SMCFW82.BIN"
value = 0 = 0x0
-> tUpgradeXa: Connecting to 127.0.0.1...
/A:/ - Volume is OK
tUpgradeXa: connected to 127.0.0.1 OK
Upgrade packet: 0..
tUpgradeXa: MMsend failed with error -1
0x3afe5d4 (tUpgradeXa): MMsend called by appl 18 before Meridian Manager Init!
0x3afe5d4 (tUpgradeXa): memPartFree: invalid block 0xeeeeeeee in partition 0x151e00.

If anybody has idea how the problem can be solved, I will be very pleased.


Thanks.