slagburn

These?

General purpose commands:
itgCardShow Displays card info.
itgMemShow Displays memory usage
ifShow Displays detailed IP information, including MAC addresses.
IPInfoShow Displays IP information.
serialNumShow Displays card serial number.
This command displays the same ITG Line 2.0 card serial
number that is displayed in the LD 32 IDC command.
firmwareVersionShow Displays firmware version number.
numChannelsShow Displays number of available channels.
swVersionShow Displays software version.
resetOM Resets the operational measurement file timer. This
command will reset all operational measurement
parameters collected since last log dump.
logFileOn Turns on error logging to the file.
logFileOff Turns off error logging to the file.
logShow Indicates whether logging is on or off.
logConsoleOn Turns on error logging to the console.
logConsoleOff Turns off error logging to the console
isetShow Displays the general info for all the i2004 Internet
Telephones that have registered, for example, IP address
of the i2004 Internet Telephone, VTN that the i2004
Internet Telephone is associated with.
itgAlarmTest Generates ITGxxxx test alarms.
itsAlarmTest Generates ITSxxxx test alarms.

etc...

I have the NTP with the commands in it... email me if you want me to shoot it over.

hophead

Thanks I found my NTP's . It seems I am suffering more and more from the CRAFT memory syndrome. Age is great 1 more here to retirment @ 55.