Rlogin settings - VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community

mitelman · January 27th, 2003

Hi all,
What do I have to do in order to have access on my system with rlogin?
( users, password.....)

Thanks

Steamer · January 27th, 2003

Here's a good place to start.
http://www.russellweb.co.uk/nortel/index1.asp
Steamer

mitelman · February 2nd, 2003

OK,
I can access the sistem using rlogin but my admin user and password is not workig.
I can access the sistem (passthru ) using OTM terminal.
Do I have to set up a different user for this?

Thanks,

Steamer · February 2nd, 2003

Not sure where you are stuck.
The rlogin protocol gets you connected to a PTY.
You should see something like this when you get connected and hit the Enter key:
Done!

TTY 04 SCH MTC 15:12
OVL111 IDLE 0
>
You should then be able to login to pbx using the same login you use from a regular tty port.
Do you get this far?

Steamer

mitelman · February 4th, 2003

I am using the same user and pass, but I can't login.Invalid pass.

Thaks

Steamer · February 4th, 2003

Sorry, you'll have to be more specific.
Do you see OVL111 when you press CR?
Can you post the tty output from your rlogin session?
What PC application are you using for rlogin?
Steamer

mmtech · June 23rd, 2003

In your rologin setup i.e. using CRT put in your ip address to the swtich
under hostname and for user name "cpsid1100". and make sure you have a pty port configured.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rlogin From Sig Server to PBX	Archibald J. Cox	Meridian Systems	7	September 1st, 2006 11:40 AM
Avaya settings for Dialogic t1 interface	stevedialx	Definity, S87xx, CM	9	August 4th, 2006 02:27 PM
Loss Plan Settings and PAD	tiny	Meridian Systems	3	September 25th, 2005 06:55 PM
Call Register Settings and Buffers	ERR3056	Meridian Systems	1	May 18th, 2004 08:37 AM
losing TAPI settings in Windows XP on option 11	dobjsonne	Meridian Systems	5	January 15th, 2003 11:02 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)