sepay

Hi mk8665,

I have the data below, but I need the standard you are using for the qsig. Because of that, I left the rodai and rocai blank. Need you info here. Thus this route used for bothway traffic coming from avaya?

Check this out.
This would work as long as you didn't use the digit 9 for any number series.
nansi:numtyp=ed,numse=9;
rodai:
rocai:
roeqi:rou=x,tru=n-y&&n-z,equ=a-bb-cc-dd;
roddi:dest=9,rou=x,srt=1;
xx = route to be used in interconnection.
n = lim number
y = trunk or ckt no. normally its x-1&&x-15 and x-17&&x-31, for ITU-T
x-1&&x-30 for iso qsig and australlia
a= lim number
bb = magazine number
cc = time slot
dd = circuit number

Regards,
Sepay

sepay

Hi mk8665,

I have the data below, but I need the standard you are using for the qsig. Because of that, I left the rodai and rocai blank. Need you info here. Thus this route used for bothway traffic coming from avaya?

Check this out.
This would work as long as you didn't use the digit 9 for any number series.
nansi:numtyp=ed,numse=9;
rodai:
rocai:
roeqi:rou=x,tru=n-y&&n-z,equ=a-bb-cc-dd;
roddi:dest=9,rou=x,srt=1;
xx = route to be used in interconnection.
n = lim number
y = trunk or ckt no. normally its x-1&&x-15 and x-17&&x-31, for ITU-T
x-1&&x-30 for iso qsig and australlia
a= lim number
bb = magazine number
cc = time slot
dd = circuit number

Regards,
Sepay

mk8665

hi this q-sig is using for both pabx to call each other. we are also able to access avaya isdn-pri (from pstn) for outgoing call when we make call from md110 phone. thanks.

sepay

Hi mk8665,
Please try this, post as soon if this doesn't work, or better yet, just pm me.

rodai:rou=xx,vari=75440000,varo=06300000,varc=0000 0000,type=SL60;
rocai:rou=xx,SEL=2110000000000010,SIG=111100000030 ,TRAF=00151515,TRM=5,SERV=001000000;

follow the previous regarding, roddi,
and roeqi must me initiated at tru=0-1&&0-30,equ=aa-bb-cc-01;

there will be no number translation since my srt is 9, so when a caller from ericsson dials 9+(external number), it will bypass avaya and go directly to your PSTN. This config may also be used in calling the avaya users.

Regards,
Sepay